本文選題：阿基米德蝸輪 + 齒面數學模型　； 參考：《西安理工大學學報》2016年03期

【摘要】：本文基于阿基米德蝸輪蝸桿(ZA蝸輪蝸桿)的加工原理及蝸輪蝸桿空間嚙合原理,推導出阿基米德蝸輪齒面數學模型及蝸輪蝸桿嚙合方程式。在蝸輪軸截面方向進行齒面網格劃分,根據蝸輪蝸桿嚙合原理以及齒面網格節點空間坐標的數值關系建立非線性方程組。最后通過MATLAB求解出阿基米德蝸輪空間網格點的坐標值及法矢,并在三坐標測量機上驗證了算法的可行性。
[Abstract]:Based on the machining principle of Archimedes worm and ZA worm gear and the space meshing principle of worm gear, the mathematical model of tooth surface of Archimedes worm gear and the meshing equation of worm gear are derived in this paper. According to the meshing principle of worm gear worm gear and the numerical relation of the space coordinate of tooth surface grid node, the nonlinear equations are established according to the meshing principle of worm gear and worm gear. Finally, the coordinate value and normal vector of Archimedes worm gear space grid point are solved by MATLAB, and the feasibility of the algorithm is verified on the CMM.
【作者單位】： 西安理工大學機械與精密儀器工程學院;
【基金】：西安市科技計劃資助項目(CXY1441(5))
【分類號】：TH132.44

【相似文獻】

相關期刊論文 前10條

1 孫殿柱,董學朱;描述真實齒面數學模型的研究[J];農業機械學報;2000年01期

2 劉祖愈;品良;;齒，

本文編號：1859155