本文選題：靜電釋放 + 攝像頭模組��； 參考：《電子技術應用》2015年12期

【摘要】：攝像頭模組主要由鏡頭、濾色片、音圈馬達、馬達驅動、圖像傳感器等部件構成。圖像傳感器和音圈馬達驅動都是CMOS半導體器件,對ESD(Electro-Static Discharge)非常敏感。本文的主要內容包括以下幾個方面:(1)攝像頭模組的ESD保護設計,主要從結構設計和電子設計兩個方面來闡述,結構設計時主要對ESD敏感區的保護;電子設計時主要是對CMOS芯片的接口引腳進行保護。(2)人體模型的研究,主要討論HBM(Human Body Model)的仿真模型的創建。(3)靜電釋放的波形仿真和實驗,主要討論測試環境的建立,并對比目標和實際波形。
[Abstract]:Camera module mainly consists of lens, filter, voice coil motor, motor drive, image sensor and other components.Image sensors and voice coil motor drivers are CMOS semiconductor devices that are very sensitive to ESD(Electro-Static charges.The main content of this paper includes the following aspects: 1) the ESD protection design of camera module, mainly from two aspects of structure design and electronic design, the protection of sensitive area of ESD in the structure design;The main purpose of electronic design is to protect the interface pin of CMOS chip. The human body model is studied. The creation of simulation model of HBM(Human Body Model is mainly discussed. The waveform simulation and experiment of electrostatic release are discussed, and the establishment of test environment is mainly discussed.And compare the target with the actual waveform.
【作者單位】： 同濟大學電子與信息工程學院;寧波舜宇光電信息有限公司;
【分類號】：TP334.2

【參考文獻】

相關期刊論文 前1條

1 劉暢;;智能手機的ESD損傷與防護[J];湖南工業職業技術學院學報;2013年03期

【二級參考文獻】

相關期刊論文 前5條

1 尹令;張麗霞;夏s，

本文編號：1758468