本文選題：噴墨打印 + 銀墨水��； 參考：《微納電子技術》2017年11期

【摘要】：以銀導電墨水為打印墨水材料,以熱塑性聚氨酯彈性體橡膠(TPU)薄膜為柔性基底材料,通過壓電式材料噴墨打印機在柔性基底上打印導電膜圖形。通過光學顯微鏡對基底材料表面打印銀墨水狀態觀察發現:基底表面親水處理可以有效提高基底對銀墨水的吸附力;柔性薄膜適當?shù)念A(yù)拉伸有利于提高薄膜平整度,提高墨水打印導電膜圖形的質量;墨滴質量、噴嘴狀態及噴嘴和基底薄膜的間隙校正是保證打印均勻性的關鍵;在燒結工藝中,采用逐漸提高溫度的方式,可達到逐漸釋放熱應力的目的,減少由于溫度劇變對TPU薄膜表面銀墨圖形結構產生變形或龜裂的現象,可有效地提高燒結后所形成導電圖案的完整性和連續性。
[Abstract]:Silver conductive ink was used as printing ink and thermoplastic polyurethane elastomer (TPU) film was used as flexible substrate. The pattern of conductive film was printed on flexible substrate by piezoelectric inkjet printer.The observation of silver ink on the substrate surface by optical microscope shows that hydrophilic treatment on the substrate surface can effectively increase the adsorption force of the substrate to silver ink, and the proper prestretching of the flexible film can improve the smoothness of the film.Improving the quality of ink printing conductive film pattern, ink droplet quality, nozzle state and gap correction between nozzle and substrate film are the key to ensure printing uniformity.The thermal stress can be released gradually and the deformation or crack of silver ink pattern on the surface of TPU film can be reduced due to the sharp change of temperature. The integrality and continuity of the conductive pattern formed after sintering can be improved effectively.
【作者單位】： 桂林電子科技大學機電工程學院;
【基金】：國家自然科學基金資助項目(61474032) 廣西研究生教育創新計劃資助項目(YCSW2017135)
【分類號】：TP334.83
，

本文編號：1752348