【摘要】：目的研究恩拉霉素在XAD-16大孔樹脂上吸附的動力學和熱力學特性。方法通過靜態吸附實驗,利用實驗數據對相關等溫模型進行擬合來描述XAD-16大孔樹脂對恩拉霉素的等溫吸附行為;用熱力學參數對恩拉霉素吸附過程的熱力學性質進行描述;分別采用準一級動力學方程和準二級動力學方程探討XAD-16大孔樹脂吸附恩拉霉素的動力學特性。結果在298~308 K內,Freundlich模型能較好的描述XAD-16大孔樹脂對恩拉霉素的吸附等溫過程;ΔH0,ΔG0,恩拉霉素在XAD-16大孔樹脂上的吸附屬于自發的物理吸附過程;XAD-16大孔樹脂對恩拉霉素吸附過程符合準二級動力學方程。結論通過對恩拉霉素在XAD-16大孔樹脂上吸附熱力學和動力學的研究,為XAD-16大孔樹脂大規模分離純化恩拉霉素提供了理論依據。
[Abstract]:Objective to study the kinetic and thermodynamic characteristics of enramycin adsorption on XAD-16 macroporous resin. Methods the isothermal adsorption behavior of enramycin on XAD-16 macroporous resin was described by static adsorption experiment, and the thermodynamic properties of enramycin adsorption process were described by thermodynamic parameters. The kinetic characteristics of enramycin adsorption by XAD-16 macroporous resin were studied by using quasi first order kinetic equation and quasi second order kinetic equation respectively. Results the adsorption isotherm of enramycin on XAD-16 macroporous resin was well described by Freundlich model within 298 ~ 308K, and the adsorption of 螖 H _ 0, 螖 G _ 0 and enramycin on XAD-16 macroporous resin was a spontaneous physical adsorption process. The adsorption process of enramycin by XAD-16 macroporous resin accords with the quasi-second order kinetic equation. Conclusion by studying the thermodynamics and kinetics of enramycin adsorption on XAD-16 macroporous resin, it provides a theoretical basis for the large-scale separation and purification of enramycin by XAD-16 macroporous resin.
【作者單位】： 浙江工商大學;
【基金】：浙江省新苗人才計劃資助項目(2015R408073) 食品科學與工程浙江省重中之重一級學科資助
【分類號】：R943

【相似文獻】

相關期刊論文 前3條

1 蘇敏;李繼安;邵雷;陳代杰;;恩拉霉素與雷莫拉寧生物合成研究進展[J];中國抗生素雜志;2011年06期

2 陳旭峰;;恩拉霉素的發酵生產[J];廣東化工;2012年16期

3 劉鐵軍;李炯;;溶磷和pH值對殺真菌素鏈霉菌合成恩拉霉素的影響[J];河北工業科技;2011年04期

相關重要報紙文章 前1條

1 張倫;恩拉霉素產能移師中國[N];醫藥經濟報;2013年

，

本文編號：2304157