【摘要】：本文主要通過對海塘防汛圍墾用金屬網兜的使用環境、編織材料、網孔結構和編織方法等方面進行分析研究，確定了不同編織材料金屬網兜使用環境和影響其材料選擇的主要因素，設計了不同使用環境下的金屬網兜及網孔結構，總結了不同形狀網孔的編織方法、金屬網編織工藝計算及常見金屬網兜網病，設計出金屬網的鎖邊工藝，不僅解決了金屬網兜編織中多余編織材料的處理，而且提高了網兜的載重能力和整體性。 針對金屬網兜類產品在計算機模擬受力分析的空白和金屬網兜在使用過程中易出現金屬網兜變形破壞和網絲斷裂的情況，通過對金屬網兜進行CAE分析和對不同編織工藝參數的試樣進行拉伸性能測試，分析了金屬網兜在不同受力情況下的變形情況和應力集中情況以及網結拉伸斷裂的機理和破壞模式，為進一步研究金屬網兜的強度失效奠定基礎。 為使防汛金屬網兜實現規�；a(chǎn)和規范化管理，本文從防汛金屬網兜的結構特點著手，以金屬網兜的載重量、網兜直徑和網絲尺寸為主要參數，采用R5為裝載量和網兜直徑的優先數系列，R20/2作為網絲尺寸的優先數系列，設計金屬網兜的系列化。最后針對金屬網兜產品的分類、規格、標記方法、技術要求和試驗方法等方面進行標準化規范，，為金屬網兜的生產提供技術依據。
[Abstract]:In this paper, the use environment, braiding materials, mesh structure and braiding methods of metal netting for flood control reclamation in seawall are analyzed and studied. The main factors influencing the material selection and the environment of metal mesh pocket of different braiding materials are determined. The structure of metal mesh pocket and mesh hole under different application environment is designed, and the weaving methods of different shape mesh holes are summarized. The design of metal mesh locking technology not only solves the treatment of excess braiding material in metal netting, but also improves the load capacity and integrity of the net pocket. In view of the blank of computer simulation force analysis of metal netting products and the situation that metal netting deformation and wire fracture are easy to occur in the process of using metal netting, The tensile properties of the samples with different braiding process parameters were tested by CAE analysis of the metal netting pocket and the tensile properties of the samples with different braiding process parameters. The deformation and stress concentration of metal netting under different loading conditions, the mechanism and failure mode of tensile fracture of metal mesh are analyzed, which lays a foundation for further study on strength failure of metal mesh. In order to realize the large-scale production and standardized management of the metal netting for flood prevention, this paper starts with the structural characteristics of the metal netting for flood prevention, taking the load weight, the diameter and the size of the mesh as the main parameters. The series of metal netting pockets are designed by using R5 as the priority series and R20 / 2 as the priority series of the mesh size. Finally, the classification, specification, marking methods, technical requirements and test methods of metal netting products are standardized and standardized, which provides the technical basis for the production of metal netting pockets.
【學位授予單位】：浙江海洋學院
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：TV87

【參考文獻】

相關期刊論文 前10條

1 周煥廷;李國強;;雙曲索網結構極限能力影響因素分析[J];四川建筑科學研究;2009年02期

2 楊曉明,陳明文,張渝,戴明安,朱相榮;海水對金屬腐蝕因素的分析及預測[J];北京科技大學學報;1999年02期

3 楊朝坤;編織結構復合材料力學性能的測試與分析[J];玻璃鋼/復合材料;2002年03期

4 趙倩娟;焦亞男;;二維編織包芯繩索的結構與拉伸性能[J];紡織學報;2012年03期

5 宋章領;沈敏德;張紅俠;;小型有軌巷道堆垛機的系列化設計[J];工程機械;2007年10期

6 王中;廖小兵;何幫;;格賓網新型結構技術工藝在軟弱地基上砌石擋墻或護坡工程中的應用[J];廣東科技;2007年07期

7 洪文培;;合金鋼網兜在防汛和水利工程的應用[J];大眾科技;2009年12期

8 韓復杰;卜祥立;;產品的系列化設計[J];河南科技;1993年04期

9 文定坤,駱萬康,孫大明,楊曦;擴張金屬網力學性能試驗方法及其成果的研究[J];重慶建筑大學學報;2004年05期

10 汪友平,鄭士元;合金鋼網兜在水利、交通、農牧漁等建設中的應用[J];今日科技;2000年12期

本文編號：2400708