超高超大懸挑結構健康監測研究
[Abstract]:With the progress of society, the development of science and technology, the continuous improvement of national economy, the emergence of large and complex structural buildings has become an inevitable trend, but because of the influence of various factors during the construction process, during operation, In the construction and operation of these large and complex structures, the probability of safety accidents is relatively high. How to reduce the occurrence of such accidents, issue warning information in advance, prepare ahead of time, ensure smooth construction, and ensure the safe use of the structure, Structural health monitoring is particularly important. Taking Hefei Dujiang campaign Memorial Hall as an example, this paper first introduces the necessity of structural health monitoring, and the monitoring method provides a basis for further research. Then, this paper discusses the numerical simulation of the elevated support and its overhanging structure in the construction process of the Memorial Hall of the Battle of the Cross River, using the ANSYS finite element orthographic analysis method. The simulation results show that the high brace and the key and dangerous parts of the structure itself in the construction process provide the basis for the on-the-spot health monitoring of the cantilever structure. Next, this paper discusses in detail the health monitoring system of the high support and its formwork in the construction process of the main overhanging structure of the Memorial Hall of the Battle of the Dujiang River, and compares the results of the on-site health monitoring with the results of numerical simulation. To provide timely information to ensure the safety and smooth construction of overhanging structure, and to provide relevant experience for similar structure construction in the future. Finally, the key construction techniques of the main overhanging structure of the campaign memorial are introduced. In order to ensure the implementation of the key construction techniques, the construction health monitoring is an indispensable technical measure.
【學位授予單位】:安徽建筑大學
【學位級別】:碩士
【學位授予年份】:2013
【分類號】:TU317
【參考文獻】
相關期刊論文 前10條
1 閔玉忠;何夕平;陳東;廖振修;;渡江戰役紀念館施工監測方案的設計與優化[J];安徽建筑工業學院學報(自然科學版);2011年01期
2 白泰禮,何羚,王彩云,鄧鐵六;基于振弦式傳感器的多功能智能檢測儀[J];傳感器技術;2004年03期
3 張心斌,紀強,張莉;振弦式應變傳感器特性研究[J];傳感器世界;2003年08期
4 崔旭升;李法理;麻德明;周少平;;基于全站儀交會的變形監測方法的應用研究[J];測繪工程;2007年05期
5 高贊明,孫宗光,倪一清;基于振動方法的汲水門大橋損傷檢測研究[J];地震工程與工程振動;2001年S1期
6 李宏男,李東升;土木工程結構安全性評估、健康監測及診斷述評[J];地震工程與工程振動;2002年03期
7 姚志遠,汪鳳泉;基于連續模型的大型結構模態參數識別[J];東南大學學報(自然科學版);2003年05期
8 徐勁;鄧浩;盛國賽;黃達;章丹峰;;某超高層建筑施工中若干監測技術研究與應用[J];廣東土木與建筑;2009年08期
9 廖曉坤;;渡江戰役紀念館高支撐體系設計[J];工程與建設;2010年03期
10 楊愛玉;丁克偉;;渡江戰役紀念館主體結構安全性分析[J];工程與建設;2012年01期
相關博士學位論文 前2條
1 刁延松;基于神經網絡和小波分析的海洋平臺結構損傷檢測研究[D];中國海洋大學;2006年
2 張慎偉;大型鋼結構施工過程計算理論與監測技術[D];同濟大學;2007年
相關碩士學位論文 前2條
1 葉芳芳;大懸挑懸掛混合結構的施工控制[D];中南大學;2009年
2 楊愛玉;大跨度懸挑桁架結構的施工監測與應用分析[D];安徽建筑工業學院;2012年
本文編號:2439620
本文鏈接:http://www.sikaile.net/kejilunwen/sgjslw/2439620.html