【摘要】：運用數值計算的方法模擬了24種不同孔洞結構的240mm×115mm×90mm(長×寬×高)粉煤灰小型空心砌塊的耦合傳熱過程,得出單個空心砌塊的當量導熱系數值。模擬中考慮沿著砌塊長度方向及寬度方向傳熱對當量導熱系數的影響。結果表明:沿著傳熱垂直方向增加孔數減弱了砌塊的保溫隔熱效果,沿著傳熱平行方向增加孔數增強了砌塊的保溫隔熱性能。另外,還對三種砌法的砌筑單元結果進行了比較,選出了最優方案,此種砌法不僅減少了尋找最優孔型的工作量和時間,而且新型砌法的結果比以往方法找出的最優方案要為理想。
[Abstract]:The coupled heat transfer process of 240mm 脳 115mm 脳 90mm (length 脳 width 脳 high) fly ash hollow block with 24 different pore structures is simulated by numerical calculation, and the equivalent thermal conductivity of a single hollow block is obtained. The influence of heat transfer along the length and width of block on the equivalent thermal conductivity is considered in the simulation. The results show that increasing the number of holes along the vertical direction of heat transfer weakens the thermal insulation effect of the block, and increases the number of holes along the parallel direction of heat transfer to enhance the thermal insulation performance of the block. In addition, the results of the three masonry methods are compared, and the optimal scheme is selected. This method not only reduces the workload and time of finding the optimal hole, The result of the new method is more ideal than that of the previous method.
【作者單位】： 南京工業大學城市建設與安全工程學院;江蘇科行環�？萍加邢薰�;
【基金】：江蘇省教育廳自然科學研究基金項目(10KJB56001)
【分類號】：TU522.34

【參考文獻】

相關期刊論文 前2條

1 李臨平;吳志根;李增耀;何雅玲;陶文銓;;粘土空心磚結構優化的數值模擬[J];工程熱物理學報;2008年05期

2 鄭河;;粉煤灰小型空心砌塊的應用前景[J];中國資源綜合利用;2009年04期

【共引文獻】

相關期刊論文 前10條

1 王曉璐;黃大宇;;節能多孔磚墻體熱工性能的數值計算及應用分析[J];四川建筑科學研究;2010年04期

2 楊丹萍;何嘉鵬;陳震;吳e，

本文編號：2160182