本文關鍵詞： 房車 模塊化 房車內部空間　出處：《江蘇大學》2016年碩士論文　論文類型：學位論文

【摘要】：隨著社會經濟的發展,人民生活水平的提高和休假制度的改革,旅游市場空前繁榮。自駕游等休閑度假方式興起,為房車旅游市場的發展帶來機遇。但是房車消費在我國屬于奢侈品消費,消費者需求呈多層次趨勢,造成房車生產批量小、成本高及品種需求多。本論文針對上述現象運用模塊化設計理念,通過整合消費者需求,對房車內部空間進行研究,尋求一種經濟可行的解決途徑。本論文運用模塊化設計理論對房車內部空間分布進行探索。通過運用文獻研究法、案例研究法、調查研究法、實地考察法等對模塊化設計理論的闡述及房車概述與需求分析,總結出模塊化設計與房車內部空間構成之間的相互關系,運用模塊化設計理論,對房車設計進行研究。將房車內部基本功能區域劃分為臥室模塊、廚房模塊、衛生間模塊和起居室模塊,根據模塊劃分原理將功能模塊分解成為基本功能、輔助功能和特殊功能三個層次,分別探討各部分的參數要求和功能劃分,提出模塊的合理劃分和組合方式的設想;最后從整體性出發,探討房車模塊化的設計要素。從中總結出房車模塊化的設計流程,并運用理論指導設計實踐。總之,如何在當前的國情下實現房車模塊化的設計,并使消費者的需求得到最大限度的滿足是本文努力探索和旨在解決的問題所在。本文力求通過模塊化設計方法實現房車內部空間設施的靈活組合,使標準化和個性化的統一成為可能。因此,本論文運用模塊化設計對房車設計進行探索,希望對房車設計起到有效地指導作用。
[Abstract]:With the development of social economy, the improvement of the people's living standard and the reform of the vacation system, the tourism market has never been more prosperous. This brings opportunities for the development of the RV tourism market. However, the RV consumption in China belongs to the luxury consumption, and the consumer demand shows a multi-level trend, resulting in a small production volume of the RV. According to the above phenomenon, this paper uses modularization design idea, through the integration of consumer demand, the interior space of the RV is studied. This paper uses modular design theory to explore the interior spatial distribution of RV. By using literature research method, case study method, investigation research method, Based on the analysis of the theory of modular design and the overview and demand analysis of RV, the paper summarizes the relationship between modular design and interior space of RV, and applies the theory of modular design. The basic function area of the trailer is divided into bedroom module, kitchen module, toilet module and living room module. According to the principle of module division, the function module is decomposed into basic function. At the three levels of auxiliary function and special function, the parameter requirement and function division of each part are discussed, and the reasonable partition and combination mode of modules are proposed. This paper discusses the design elements of modulization of RV, summarizes the design flow of Modularization of RV, and uses theory to guide the design practice. In a word, how to realize the modularization design of RV under the current situation, And to meet the needs of consumers to the maximum extent is the purpose of this paper to explore and solve the problem. This paper aims to achieve the modular design method to achieve the flexible combination of the interior space facilities of the RV. It is possible to unify standardization and individuation. Therefore, this paper uses modular design to explore the design of RV, hoping to play an effective role in guiding the design of RV.
【學位授予單位】：江蘇大學
【學位級別】：碩士
【學位授予年份】：2016
【分類號】：U469.1

【參考文獻】

相關期刊論文 前10條

1 沙強;陳逸珉;;房車內部設計中的居住行為需求研究[J];藝術教育;2016年02期

2 唐波;;房車在中國未來的發展[J];汽車與配件;2013年12期

3 王建軍;勿任吐牙;;國內外模塊化實踐研究現狀——基于文獻綜述[J];經濟師;2011年03期

4 范林;王哲;;模塊化技術在飛機研制中的應用[J];航空科學技術;2010年03期

5 陸良;楊殿閣;顧錚珉;張新豐;連小珉;;采用模塊化思想的汽車電器智能化設計方法[J];西安交通大學學報;2010年05期

6 陳懷民;;大規模定制生產模式在彩電制造中的應用[J];科學咨詢(決策管理);2009年12期

7 魏江;趙江琦;鄧爽;;基于模塊化架構的金融服務創新模式研究[J];科學學研究;2009年11期

8 甘志霞;王佳寧;;造船業模塊化制造網絡的形成機制分析[J];科技管理研究;2009年03期

9 趙君田;潘忠志;李忠閣;;東北老工業基地的產業集群發展模式研究[J];東北電力大學學報(社會科學版);2008年05期

10 徐雙慶;陳學光;李晶;;國內外模塊化理論研究綜述[J];科技管理研究;2008年09期

，

本文編號：1539409