本文關鍵詞：汽車淺色金屬漆修補涂裝色差研究　出處：《吉林大學》2016年碩士論文　論文類型：學位論文

  更多相關文章： 車身涂膜 汽車修補涂裝 淺色金屬漆 色差研究

【摘要】：在車輛使用過程中,發生刮碰事故總是無法避免,對于如何修復并做出令顧客滿意的涂膜,是每個汽車修補漆涂裝調色工程師和維修技術人員都應考慮的問題,更是從事汽車涂裝相關院校教師和科研人員的責任。然而,車身色差的控制是一個極為復雜的過程,影響最終涂膜色差的因素多種多樣,與涂裝材料、噴涂工藝、噴涂設備、施工環境等因素密切相關,在維修過程中有某一個過程沒有控制好,極有可能產生色差現象,特別是淺顏色的金屬面漆在維修時更容易產生。因此,有必要研究車身涂膜色差的控制方法和解決涂膜色差的技術,來提高維修企業的技術水平,滿足客戶對于車身涂膜質量的維修要求。本文以遼寧省交通高等�？茖W(xué)校“汽車淺色金屬漆噴涂缺陷的研究”項目為依托,以車身淺色金屬漆修補涂裝色差問題為研究目標,利用專家打分法歸納出研究的具體方向,經過企業信息反饋到試驗分析總結再到企業施工驗證的流程,多次循環工作,最終找到解決車身淺色金屬漆修補涂裝色差的通用方法。本文的主要內容包括:1.汽車涂膜的類型和色差控制方法,介紹淺色金屬漆修補涂裝色差缺陷的相關理論知識。2.淺色金色漆修補涂裝色差缺陷的專家評分與試驗,通過企業調研,針對調研結果確定研究的重點和難點,并在實驗室中進行缺陷還原試驗。3.車身修補涂裝色差分析,分析試驗結果,總結影響涂膜色差的因素,并制定標準的涂膜維修工藝。4.過渡噴涂技術的設計與實際應用,設計過渡噴涂方案解決極難解決的淺色金色漆維修色差問題,通過企業的反饋結果調整工藝,確定最佳方案。
[Abstract]:In the process of vehicle use, scratching accidents are always unavoidable. How to repair and make coating to the satisfaction of customers is a problem that should be considered by every painting engineer and maintenance technician. It is the responsibility of teachers and researchers in automobile painting related colleges and universities. However, the control of body color difference is a very complex process, the factors that affect the final coating color difference are various, and coating materials. Spraying process, spraying equipment, construction environment and other factors are closely related, in the maintenance process there is a process that is not well controlled, it is very likely to produce color aberration phenomenon. Especially the light color metal topcoat is more easy to produce in maintenance. Therefore, it is necessary to study the control method of color difference and the technology to solve the color difference in order to improve the technical level of maintenance enterprises. To meet the customer's maintenance requirements for the quality of body coating. This paper is based on the project of "Research on defects of Automotive Light Metal paint spraying" in Liaoning Communication College. Taking the problem of tinting color difference of light metal paint as the research goal, the specific direction of the research is summed up by using the expert scoring method, and the process of enterprise construction verification is summarized through the feedback of enterprise information to the test and analysis. After many cycles, we finally find a general method to solve the color difference of light metal paint. The main contents of this paper include: 1. The type of automobile coating film and the control method of color difference. This paper introduces the theoretical knowledge of tinting color difference defect of light metal paint repair. 2. The expert score and test of light color gold paint repair color difference defect, through enterprise investigation. According to the investigation results, the key and difficult points of the study were determined, and the defect reduction test was carried out in the laboratory .3.The color difference analysis of the body repair coating was carried out, the test results were analyzed, and the factors affecting the color difference of the coating film were summarized. Design and practical application of transition spraying technology, design transition spray scheme to solve the extremely difficult to solve the problem of color aberration of light color gold paint maintenance. 4. Through the feedback results of the enterprise to adjust the process, determine the best program.
【學位授予單位】：吉林大學
【學位級別】：碩士
【學位授予年份】：2016
【分類號】：U466

【參考文獻】

相關期刊論文 前10條

1 江旭;;長安福特市場營銷的策略分析[J];中國商貿;2014年05期

2 謝傳勇;劉華林;王亮;;淺談汽車塑料件涂料的色差控制[J];涂料技術與文摘;2013年12期

3 周克堯;;水性金屬閃光漆的流變行為控制[J];上海涂料;2013年07期

4 姚學民;孟昭輝;趙琳;王鳳喜;周峰;劉廣益;;油漆的配色理論[J];天津科技;2013年03期

5 朱余山;;汽車制造過程中的色差管理[J];現代涂料與涂裝;2013年03期

6 錢茵;彭利明;陳益平;;汽車車身同色件色差控制管理[J];現代涂料與涂裝;2012年10期

7 張湘衡;;淺談漆面烘烤設備[J];汽車維修與保養;2012年08期

8 肖艷;;第六十二講 漫談汽車涂料的功能特性及組成機理[J];聚氨酯;2012年05期

9 陳良印;陳拯;尹鵬;;淺談轎車油漆色差控制[J];涂料技術與文摘;2011年09期

10 馬東杰;杜保義;;色彩營銷在汽車營銷中的應用[J];上海汽車;2011年07期

相關碩士學位論文 前7條

1 楊琦;發動機積碳治理與評價方法研究[D];吉林大學;2014年

2 韓高陽;預應力錨桿復合土釘支護結構優化設計與應用[D];河北工程大學;2011年

3 孟\~;水性汽車色漆的制備[D];復旦大學;2011年

4 馬健;基于USB2.0的高速高精度分光測色系統設計[D];西安電子科技大學;2008年

5 馬耀宏;補色還原糖光度傳感器機理及應用研究[D];山東大學;2007年

6 黨偉;基于顏色傳感器的色度色差儀的開發與研究[D];華中科技大學;2007年

7 張全;計算機輔助油漆配色系統的BP網絡研究[D];西北工業大學;2003年

，

本文編號：1398338