本文選題：止回閥 + 數值模擬　； 參考：《流體機械》2016年02期

【摘要】：為了改進普通止回閥存在的開啟角度小、流阻系數大等不足,設計一種新型斜置雙瓣止回閥,對其在30°、50°、70°、80°及全開工況下的內部流動特性進行分析,計算出流阻系數及流量系數。對其進行壓力損失特性試驗及流量特性試驗,計算出每個工況下的流阻系數及流量系數,將其與模擬數據進行對比分析。研究結果表明,斜置雙瓣止回閥的模擬結果與試驗結果比較接近,開啟角度大,壓力損失小,流阻系數小,流量系數大,通流能力好。通過對斜置雙瓣止回閥進行數值模擬及試驗研究,斜置雙瓣止回閥的設計對流體系統節能具有指導意義。
[Abstract]:In order to improve the common check valve with small opening angle and large flow resistance coefficient, a new type of oblique double-valve check valve was designed. The internal flow characteristics of the valve under 30 擄~ 50 擄~ 70 擄~ 80 擄and full open working conditions were analyzed, and the flow resistance coefficient and flow coefficient were calculated. The pressure loss characteristic test and flow characteristic test are carried out to calculate the flow resistance coefficient and flow coefficient under each working condition, and the flow resistance coefficient and flow coefficient are compared and analyzed with the simulated data. The results show that the simulation results of oblique double-valve check valve are close to the experimental results, with large opening angle, small pressure loss, small flow resistance coefficient, large flow coefficient and good flow capacity. Through the numerical simulation and experimental study on the oblique double-valve check valve, the design of the oblique double-valve check valve is of guiding significance to the energy saving of fluid system.
【作者單位】： 中節能先導城市節能有限公司;長沙理工大學;
【分類號】：TH134
，

本文編號：2095904