【摘要】：隨著物聯網概念的提出，其用途不斷的擴展，現在已普遍的應用到工業檢測、樓控系統、家庭智能設備、移動終端、視頻監控系統和鐵路監控系統等各個領域，在測井系統設計中也可以運用物聯網的原理。本文的主要研究方向?yàn)榛贒SP的嵌入式石油測井系統中的數據傳輸和控制部分。根據物聯網的設計理念，本測井系統可分為三部分,分別是井下數據采集和傳輸系統（下位機）、地面數據傳輸和檢測系統（上位機）、數據監控中心（服務器）等。 下位機是由數據采集和數據傳輸兩個模塊組成，數據采集是通過各種測井需要的傳感器和AD模塊配合進行數據采集，而數據傳輸是運用CAN總線將采集到的數據發送出去。服務器可以接收多個下位機傳輸?shù)臄?shù)據，同時完成數據的分析、管理、存儲和顯示等。上位機的主要功能是通過CAN總線接收下位機的數據，然后數據打包后通過TCP/IP協議傳輸給服務器。 論文主要介紹了該系統的整體構架和上位機的實現。上位機的硬件電路的設計主要包括TMS320F2812的最小系統、CAN通信模塊、以太網通信模塊、電子盤存儲模塊等。本系統在TMS320F2812芯片上移植了μC/OS-II實時操作系統，，并在此基礎上實現以太網協議棧、FAT文件系統、CAN通信等各個功能模塊之間的協調工作。
[Abstract]:With the introduction of the concept of the Internet of Things, its use has been expanding, and now it has been widely used in industrial detection, building control system, home intelligent equipment, mobile terminals, video surveillance system and railway surveillance system and other fields. The principle of the Internet of Things can also be used in the design of logging system. According to the design concept of the Internet of Things, the logging system can be divided into three parts: downhole data acquisition and transmission system (slave computer), ground data transmission and detection system (upper computer), data monitoring center (server).
The slave computer is composed of two modules: data acquisition and data transmission. Data acquisition is carried out by the cooperation of various sensors and AD modules required by logging. Data transmission is to send the collected data out by using CAN bus. The server can receive data transmitted by multiple slave computers and complete data analysis and management. The main function of the upper computer is to receive the data of the lower computer through CAN bus, and then pack the data and transmit it to the server through TCP/IP protocol.
This paper mainly introduces the whole frame of the system and the realization of the host computer.The design of the hardware circuit of the host computer mainly includes the minimum system of TMS320F2812, CAN communication module, Ethernet communication module, electronic disk storage module and so on.The system transplants the real-time operating system of Mu C/OS-II on the chip of TMS320F2812 and realizes on this basis. The coordination between various functional modules such as Ethernet protocol stack, FAT file system, CAN communication and so on.
【學位授予單位】：西安電子科技大學
【學位級別】：碩士
【學位授予年份】：2012
【分類號】：TP274.2;TP368.12

【參考文獻】

中國期刊全文數據庫 前6條

1 閻航;;FAT文件系統在NAND Flash存儲器上的改進設計[J];單片機與嵌入式系統應用;2006年11期

2 張雪;楊春林;黃娟;;NAND FLASH文件系統的設計與實現[J];福建電腦;2007年10期

3 周威;;圖靈開物 物聯新軍——訪北京圖靈開物技術有限公司總經理曲濤[J];科技與企業;2011年03期

4 劉哲 ,何勇靈 ,衛堯;網絡技術與汽車電子控制系統發展[J];汽車研究與開發;2003年02期

5 王志武;范蟠果;;嵌入式實時操作系統μC/OS-Ⅱ在TMS320F2812上的移植[J];微計算機應用;2007年08期

6 何湘智;吳暉;周偉;;μC/OS-Ⅱ在TMS320F2812上的移植研究[J];現代電子技術;2010年04期

中國碩士學位論文全文數據庫 前4條

1 陳永堅;基于物聯網的蔬菜物流管理系統的設計與實現[D];河南大學;2011年

2 臧斌;基于TMS320DM642的嵌入式視頻處理系統設計[D];河北大學;2011年

3 陳志東;GPRS數據終端及在基站動力環境系統中的應用[D];東北農業大學;2007年

4 孫安云;基于FAT文件系統的NAND Flash嵌入式存儲模塊的設計和實現[D];蘇州大學;2008年

本文編號：2195458