本文關鍵詞： 鏈斗式連續卸船機 俯仰機構 擺動系統 BE斗式提升機 可靠性　出處：《燕山大學》2014年碩士論文　論文類型：學位論文

【摘要】：本文以曹妃甸礦石碼頭2期鏈斗式連續卸船機為研究對象，對鏈斗式連續卸船機的現狀，基本原理進行了闡述，，并結合鏈斗式連續卸船機生產過程中的故障實例，對鏈斗式連續卸船機故障分析排除以及可靠性管理進行了深入的分析和研究，并提出提高鏈斗式連續卸船機可靠性措施。 首先介紹了曹妃甸礦石碼頭鏈斗式連續卸船機的基本情況，以及鏈斗式連續卸船機的國內外發展?fàn)顩r。以曹妃甸礦石碼頭鏈斗式連續卸船機為背景，闡述了鏈斗式連續卸船機主要設備及基本原理，重點對液壓系統進行了詳細介紹。 俯仰機構液壓系統經常在作業中報高低壓故障，嚴重影響了設備的可靠性，為提高鏈斗機的生產效率，重點對液壓系統，物料輸送系統和安全保護系統的典型故障的現象、處理過程進行了介紹，并對故障產生的原因以及處理措施進行了深入的研究分析，且對改造所產生的效益和結果進行分析。 最后從提高鏈斗式連續卸船機可靠性和管理的角度出發，對鏈斗式連續卸船機使用階段的可靠性管理、人的可靠性管理兩個方面進行了研究分析，結合曹妃甸礦石碼頭生產實踐，提出了一系列的改進意見。 通過鏈斗式連續卸船機設備故障排除和可靠性管理研究對提高設備的生產率、維護管理水平和應用水平具有重要意義，同時提高公司整體的經濟效益創造了前提條件。
[Abstract]:This paper takes Caofeidian Ore Wharf Phase 2 chain bucket continuous ship unloader as the research object, and expounds the current situation and basic principle of chain bucket continuous ship unloader. Combined with the failure example in the production process of chain bucket continuous ship unloader, the fault analysis and troubleshooting and reliability management of chain bucket continuous ship unloader are deeply analyzed and studied. The measures to improve the reliability of chain bucket continuous ship unloader are put forward. This paper first introduces the basic situation of the chain bucket type continuous ship unloader in Caofeidian ore wharf, and the development of the chain bucket type continuous ship unloader at home and abroad, taking the Caofeidian ore wharf chain bucket continuous ship unloader as the background. The main equipment and basic principle of chain bucket type continuous ship unloader are expounded, and the hydraulic system is introduced in detail. The pitching mechanism hydraulic system often reports the high and low pressure faults in the work, which seriously affects the reliability of the equipment. In order to improve the production efficiency of the chain hopper, the emphasis is on the hydraulic system. This paper introduces the typical failure phenomenon of material conveying system and safety protection system, and introduces the treatment process, and makes a thorough research and analysis on the causes of the failure and the treatment measures. The benefits and results of the transformation are analyzed. Finally, from the point of improving the reliability and management of the chain bucket type continuous ship unloader, the reliability management and human reliability management of the chain bucket type continuous ship unloader are studied and analyzed. Combined with the production practice of Caofeidian ore wharf, a series of suggestions for improvement are put forward. It is of great significance to improve the productivity of the equipment, maintain the management level and the application level through the research of troubleshooting and reliability management of the chain bucket continuous ship unloader. At the same time, improve the overall economic efficiency of the company to create a prerequisite.
【學位授予單位】：燕山大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：U653.928.1

【參考文獻】

相關期刊論文 前10條

1 張巍峰;丁衛國;;連續式卸船機的選型[J];港口科技;2007年09期

2 吳立揚;港口設備的可靠性管理[J];港口裝卸;1999年04期

3 鄭見粹;張振雄;;連續卸船機的使用與發展[J];港口裝卸;2005年05期

4 方原柏;;電子皮帶秤的現狀和發展動向[J];衡器;2006年06期

5 厲達;何福勝;;皮帶秤技術的應用現狀及發展趨勢[J];衡器;2008年05期

6 鄭炳賢;薛培生;劉洋;;裝備維修質量管理研究[J];江蘇航空;2007年01期

7 李俊山,張鵬,劉武,陳小峰;離心式壓縮機失效故障樹分析[J];石油和化工設備;2005年02期

8 胡夕嵐;;提高電子皮帶秤使用精度的方法[J];華中電力;2007年02期

9 謝明;劉學敏;;液壓卡緊現象的故障分析[J];機床與液壓;2005年12期

10 李中偉;李興銀;張德寶;;基于維修性的裝備備件管理[J];科技信息;2011年15期

本文編號：1485586