【摘要】：由于測距原理不同,相位式地面三維激光掃描儀相較于脈沖式具有測量精度高、測程短的特點。文中以Z+F IMAGER 5010C相位式地面三維激光掃描儀為試驗對象,從距離入手,對其內、外符合精度進行了計算分析,并研究了此掃描儀用于變形監測的適用條件。結果表明:Z+F IMAGER 5010C掃描儀的測量精度隨著距離的增加而降低;內符合精度要優于外符合精度;內符合精度分析結果表明,在設置靶標用于掃描數據配準的作業方式下同時開展高程、水平方向的監測,掃描儀距離掃描對象控制在30 m之內,可進行三級變形監測;外符合精度分析結果表明,借助全站儀測量靶標中心點坐標用于掃描數據配準的作業方式下同時開展高程、水平方向的監測,掃描儀距離掃描對象的距離控制在20 m之內,亦可進行三級變形監測。
[Abstract]:Because of the different ranging principles, the phase 3D laser scanner has the characteristics of high accuracy and short range compared with the pulse laser scanner. Taking the Z F IMAGER 5010C phase 3D laser scanner as the experimental object, the accuracy of the internal and external coincidence is calculated and analyzed from the distance, and the applicable conditions of the scanner for deformation monitoring are studied. The results show that the measuring accuracy of the Z F IMAGER 5010C scanner decreases with the increase of distance, the accuracy of internal coincidence is better than that of external coincidence, and the analysis results of the accuracy of internal coincidence show that, In the operation mode of setting target for scanning data registration, the monitoring of elevation and horizontal direction is carried out simultaneously. The scanner is controlled within 30 m from the scanning object and can be monitored for three stages of deformation. The result of precision analysis of external coincidence shows that, With the aid of total station measuring the coordinate of the center point of the target, the height and horizontal direction are monitored simultaneously in the operation mode of scanning data registration. The distance between the scanner and the scanned object is controlled within 20 m, and the third level deformation monitoring can also be carried out.
【作者單位】： 四川省安全科學技術研究院;重大危險源測控四川省重點實驗室;
【基金】：國防科工局產業化應用(87-Y40G06-9001-15/18) 四川省科技廳國際合作計劃(2017HH0085) 四川省安全生產科技(scaqjgjc_stp_201613/14/17/27,aj20170518194207,aj20170522150214)
【分類號】：P225.2;TU196.1

【相似文獻】

相關期刊論文 前10條

1 張會霞;陳宜金;劉國波;;基于三維激光掃描儀的校園建筑物建模研究[J];測繪工程;2010年01期

2 金菁;李l勮，

本文編號：2229072