【摘要】：伴隨著智能電網的發展,以及網絡通信技術和變電站自動化技術的進步,變電站無人值守已經成為智能變電站建設的趨勢。視頻信息與環境量信息之間的聯動,以及綜合自動化系統與視頻監控系統之間的信息交互是實現變電站無人值守的基礎,是變電站輔助監控系統智能化的核心。但是目前變電站輔助監控系統通信協議種類繁多,聯動實現方式具有局限性,隨著電網規模的逐漸擴大,聯動實現日益復雜,目前缺乏有效的方法對視頻聯動過程和結果進行測試。因此開展輔助監控系統內部以及與其他子系統之間聯動的測試研究具有極強的現實意義和實際應用價值。本文采用事件仿真和協議模擬方式,依據變電站告警事件推送模式,基于IEC60870-5-104遠動規約、SIP協議,利用事件注入技術、XML解析技術、網絡編程技術等,在Visual Studio 2010開發平臺下利用C++編程語言實現視頻聯動測試。主要工作如下:1)分析了輔助監控系統聯動測試實現在智能變電站建設中的重要意義。通過分析現有輔助監控系統聯動結構,并對目前聯動系統中廣泛應用的IEC60870-5-104遠動規約和Q/GDW 517.1-2010《電網視頻監控系統及接口第1部分:技術要求》進行研究。2)針對輔助系統聯動方案,提出模擬仿真測試方法,通過研究事件注入、時序控制等技術,設計了聯動協議測試和聯動功能性能測試相結合的整體測試架構。3)根據模擬仿真測試方法,在對聯動協議研究的基礎上,利用接口測試和容錯性測試方式,分別從正向協議互通性測試和反向協議容錯性測試入手,實現了IEC60870-5-104遠動規約測試和電網視頻監控系統接口B聯動部分協議測試。4)在協議測試基礎上,建立告警事件模擬庫,利用時序控制方法設計告警事件觸發過程,實現模擬事件注入。利用XML解析等技術提取反饋報文信息,分析聯動效率、聯動準確度等性能指標,完成聯動性能測試。5)通過與設備廠家的聯調測試,驗證了測試方法的正確性和測試系統穩定性,聯動測試的實現對無人值守智能變電站輔助監控系統建設具有很好的實際應用價值。
[Abstract]:With the development of smart grid and the progress of network communication technology and substation automation technology, substation unattended substation has become the trend of intelligent substation construction. The linkage between video information and environmental quantity information, and the information interaction between integrated automation system and video surveillance system are the basis of realizing unattended substation, and the core of substation auxiliary monitoring system intelligence. However, at present, there are many kinds of communication protocols in substation auxiliary monitoring system, and the implementation of linkage has limitations. With the gradual expansion of power grid scale, the realization of linkage is becoming more and more complex. At present, there is a lack of effective methods to test the process and results of video linkage. Therefore, it is of great practical significance and practical application value to carry out the test research of the linkage between the auxiliary monitoring system and other subsystems. In this paper, event simulation and protocol simulation are adopted, according to the alarm event push mode of substation, based on IEC60870-5-104 telecontrol protocol, SIP protocol, event injection technology, XML analysis technology, network programming technology and so on, the video linkage test is realized by C programming language under the development platform of Visual Studio 2010. The main work is as follows: 1) the significance of linkage testing of auxiliary monitoring system in the construction of intelligent substation is analyzed. Based on the analysis of the linkage structure of the existing auxiliary monitoring system, the IEC60870-5-104 telecontrol protocol and Q/GDW 517.1 / 2010 "Power Network Video Surveillance system and Interface part 1: technical requirements", which are widely used in the linkage system, are studied. 2) aiming at the linkage scheme of the auxiliary system, the simulation and test method is put forward, and the techniques such as event injection and timing control are studied. The overall test architecture of linkage protocol test and linkage functional performance test is designed. 3) according to the simulation test method, on the basis of the research of linkage protocol, the interface test and fault tolerance test are used to start with the forward protocol interoperability test and the reverse protocol fault tolerance test, respectively. IEC60870-5-104 telecontrol protocol test and power network video surveillance system interface B linkage part protocol test are realized. 4) on the basis of protocol testing, the alarm event simulation library is established, and the alarm event trigger process is designed by using timing control method to realize analog event injection. Using XML analysis and other technologies to extract feedback message information, analyze linkage efficiency, linkage accuracy and other performance indicators to complete the linkage performance test. 5) through the joint test with equipment manufacturers, the correctness of the test method and the stability of the test system are verified. The realization of linkage testing has a good practical application value for the construction of unattended intelligent substation auxiliary monitoring system.
【學位授予單位】：電子科技大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：TM63;TM76

【參考文獻】

相關期刊論文 前3條

1 郭健生;吳文宣;王云茂;梁曼舒;張華輝;;基于TinyXML的智能變電站SCD文件的解析[J];電力與電工;2011年03期

2 曹楠;李剛;王冬青;;智能變電站關鍵技術及其構建方式的探討[J];電力系統保護與控制;2011年05期

3 龐永剛;王慧強;鄭瑞娟;;用于網絡可信性評測的事件注入技術仿真研究[J];系統仿真學報;2008年10期

相關博士學位論文 前1條

1 任雁銘;變電站計算機通信網絡和系統的研究[D];華北電力大學;2000年

，

本文編號：2500743