【摘要】：當前，電池組作為無污染、高性能的新能源被廣泛的應用，電池組的工作性能和狀態直接影響到設備正常運作，隨著工業生產對電池組的使用數量的不斷增多，傳統的電池組監測設備已經不能滿足特殊工況下的監測和大量數據處理的需求。作為新一代信息技術的物聯網，憑借全面感知、可靠傳輸和智能處理的特點，在智能監測領域的應用已成為研究熱點。因此，將物聯網技術應用到電池組遠程監測領域，對提高電池組監測系統智能化水平的具有重要的意義。 本文應用物聯網技術結構搭建電池組遠程監測系統，實現對電池組數據的遠程傳輸和數據智能處理功能。根據物聯網體系結構將系統分為數據采集系統、通訊系統和監測平臺三大部分。在設計時又分成軟、硬件兩部分進行實現。硬件系統采用模塊化設計，包括主控制模塊、采集模塊、GPRS模塊和服務器接收模塊。硬件系統主要實現對數據的采集和數據的無線傳輸功能。 在軟件設計時，首先進行了GPRS模塊和服務器模塊無線通訊功能的實現。然后針對電池組遠程監控中心的功能需求，建立SQL server數據庫，IIS web服務器，，應用ADO.NET、ASP等訪問技術，實現人機界面與數據庫服務器的通訊功能，完成了基于物聯網技術的電池組遠程監控監測系統的設計。 最后對電池組遠程監測整體性能進行測試，并完成對采集的數據誤差分析。測試結果證明系統可以準確的采集電池組狀態數據，無線傳輸網絡穩定可靠，監測平臺實現了對電池組數據運行狀態的實時監測和有效管理。證明了基于物聯網技術電池組遠程監測系統設計的可行性和實用性。
[Abstract]:At present, batteries are widely used as non-polluting and high-performance new energy sources. The performance and state of batteries directly affect the normal operation of the equipment. The traditional battery pack monitoring equipment can not meet the needs of monitoring and data processing under special conditions. As a new generation of information technology, the Internet of things (IOT) has become a research hotspot in the field of intelligent monitoring with the characteristics of total perception, reliable transmission and intelligent processing. Therefore, it is of great significance to apply the technology of Internet of things to the field of remote monitoring of battery pack in order to improve the intelligent level of battery pack monitoring system. In this paper, the remote monitoring system of battery pack is set up by using the structure of Internet of things, and the functions of remote transmission and intelligent data processing of battery pack are realized. According to the structure of Internet of things, the system is divided into three parts: data acquisition system, communication system and monitoring platform. In the design, it is divided into two parts: software and hardware. The hardware system adopts modularization design, including main control module, acquisition module, GPRS module and server receiving module. The hardware system mainly realizes the function of data acquisition and wireless transmission. In software design, the wireless communication function of GPRS module and server module is implemented. Then, according to the function requirement of battery pack remote monitoring center, the SQL server database, IIS web server is established, and the access technology, such as ADO.NET,ASP, is applied to realize the communication function between the man-machine interface and the database server. The remote monitoring and monitoring system of battery pack based on Internet of things technology is designed. Finally, the whole performance of battery pack remote monitoring is tested, and the error analysis of collected data is completed. The test results show that the system can collect the battery state data accurately and the wireless transmission network is stable and reliable. The monitoring platform realizes the real-time monitoring and effective management of the battery pack data running state. The feasibility and practicability of the remote monitoring system for battery pack based on the Internet of things technology are proved.
【學位授予單位】：哈爾濱理工大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：TM910;TP274

【引證文獻】

相關期刊論文 前1條

1 王申;關勝曉;吳勇;曾逸琪;;基于IaaS云平臺的無線傳感網實時監測系統[J];計算機系統應用;2016年06期

相關碩士學位論文 前4條

1 王申;基于WSN的智能養殖控制系統研究[D];中國科學技術大學;2016年

2 李濤;變電站用閥控式密封鉛酸蓄電池監測系統研究與設計[D];湖南大學;2015年

3 溫建;遠程實驗室環境監測系統設計與實現[D];長沙理工大學;2015年

4 賈繼洋;基于嵌入式的視頻無線傳輸系統的研究[D];西安工程大學;2015年

本文編號：2409029