本文選題：多相感應電機 + 端部漏感　； 參考：《中國電機工程學報》2014年30期

【摘要】：為計算計及喇叭口的多相感應電機定子繞組的端部漏感,提出了基于矢量磁位的數值計算方法。該文通過矢量磁位沿線圈端部的線積分計算磁通進而求取線圈間端部漏感,該方法與通過磁密的面積分來計算磁通的傳統方法相比,可方便處理定子繞組復雜的端部結構,提高計算速度與結果的準確性。矢量磁位法沿用將線圈間端部漏感與關聯矩陣相結合計算相間端部漏感的總體思路,具有應用靈活、通用性強的優點。以某15相感應電機為例,給出了矢量磁位法計算端部漏感的計算過程,通過對計算結果的分析說明了矢量磁位法計算端部漏感的有效性。
[Abstract]:In order to calculate the end leakage inductance of multiphase induction motor stator windings, a numerical calculation method based on vector magnetic potential is proposed. In this paper, the magnetic flux is calculated by the line integral of the end of the loop along the vector magnetic potential and the leakage inductance between the coils is obtained. Compared with the traditional method of calculating the flux through the area of magnetic density, this method can easily deal with the complex end structure of the stator winding. Improve the calculation speed and accuracy of the results. The vector magnetic potential method adopts the general idea of combining the leakage inductance between the coils and the correlation matrix to calculate the leakage inductance of the interphase end, which has the advantages of flexible application and strong generality. Taking a 15-phase induction motor as an example, the calculation process of end leakage inductance calculated by vector magnetic potential method is given. The effectiveness of vector magnetic potential method in calculating end leakage inductance is illustrated by analyzing the calculation results.
【作者單位】： 青島大學自動化工程學院;海軍工程大學艦船綜合電力技術國防科技重點實驗室;
【基金】：國家重點基礎研究發展計劃項目(973項目)(2013CB035601) 國家自然科學基金項目(51077074,51137005,51222705,51207163,51377086)~~
【分類號】：TM343

【參考文獻】

相關期刊論文 前4條

1 吳新振;王祥珩;;12/3相雙繞組異步發電機定子槽漏感的計算[J];中國電機工程學報;2007年12期

2 吳新振;王祥珩;;12/3相雙繞組異步發電機定子諧波漏感的計算[J];中國電機工程學報;2007年21期

3 吳新振;王祥珩;;12/3相雙繞組異步發電機定子端部漏感的計算[J];中國電機工程學報;2007年24期

4 王東;吳新振;馬偉明;郭云s，

本文編號：2085897