發布時間：2018-05-21 11:02

  本文選題：智能變電站 + 虛擬回路��； 參考：《北京工業大學》2014年碩士論文

【摘要】：隨著IEC61850標準在智能變電站內的深入應用,能夠承載海量數據的數字通訊網絡替代了傳統的電纜接線方式。設備之間的信息傳輸方式由常規變電站內電纜傳輸?shù)碾娦盘?hào)轉變?yōu)楣饫w傳輸?shù)臄?shù)字信號,原來“看得見、摸得著”的采樣值輸入和跳閘輸出的端子連接,變成了基于網絡傳輸?shù)腟V/GOOSE(sample value/Generic Object Oriented Substation Events)數字信號。智能變電站的設備之間回路不再是以電纜傳輸單一信號構成的純電路結構,而是以光纖數字通信為基礎的網絡化結構,每一根光纖中同時傳輸多路SV/GOOSE信號,無法再從外部直接的物理連線去分析整個回路,取而代之的則是設備之間的虛擬回路。傳統的通過萬用表、繼電保護測試儀等工具直接調試和檢測設備層的手段已經不能滿足智能變電站的調試和檢測需要。本文通過分析智能變電站設備的調試與檢測工作流程,以IEC61850標準的一致性為基礎,開發了一套以PC機為硬件平臺,跨平臺的、具有圖形界面的智能變電站設備層可視化系統。該系統通過仿真智能變電站內多個智能設備的功能,可視化展示設備之間相互訂閱的GOOS信號傳輸,SV信號的傳輸,并且驗證SV/GOOSE信號連接傳遞的正確性,實現四方公司在智能變電站調試與檢測過程中的“準確化、可視化、快速化”,可以幫助設計和工程人員清晰查看的全站設備的互聯關系,提升全站設備的調試和檢測工作效率,能方便分析和診斷工程實施及運行維護中出現的復雜問題,提高了工作效率,大大的節省了成本。
[Abstract]:With the application of IEC61850 standard in intelligent substation, digital communication network, which can carry mass data, has replaced the traditional cable connection mode. The mode of information transmission between devices is changed from electrical signal transmitted by cable in conventional substation to digital signal transmitted by optical fiber. The original "visible, tangible" sampling value input and tripping output terminal are connected. It turns into a SV/GOOSE(sample value/Generic Object Oriented Substation Events) digital signal based on network transmission. The circuit between devices in intelligent substation is no longer a pure circuit structure composed of a single signal transmitted by cable, but a networked structure based on optical fiber digital communication, in which multiple SV/GOOSE signals are transmitted simultaneously in each optical fiber. It is no longer possible to analyze the entire loop from a direct external physical connection, instead of a virtual loop between devices. Traditional tools, such as multimeter and relay protection tester, can not meet the needs of intelligent substation debugging and testing. Based on the analysis of the debugging and testing work flow of intelligent substation equipment and based on the consistency of IEC61850 standard, this paper develops a visual system of intelligent substation equipment layer based on PC as hardware platform and cross-platform with graphical interface. By simulating the functions of several intelligent devices in intelligent substation, the system visualizes the transmission of SV signals by GOOS signals subscribed to each other between the devices, and verifies the correctness of SV/GOOSE signal connection transmission. To realize the "accurate, visual and fast" in the debugging and testing process of intelligent substation by Sifang Company, which can help design and engineer to see clearly the interconnection relationship of the whole station equipment. It is easy to analyze and diagnose the complex problems in the implementation and maintenance of the project, improve the working efficiency and save the cost greatly by improving the debugging and testing efficiency of the whole station equipment.
【學位授予單位】：北京工業大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：TM76;TM63

【參考文獻】

相關期刊論文 前1條

1 鄧秋娥;杜奇壯;盧娟;;可視化編程在微機保護中的實現[J];繼電器;2008年03期

，

本文編號：1918935