本文選題：管道缺陷 + 缺陷擴展��； 參考：《上海交通大學》2014年碩士論文

【摘要】：本文基于ASME規范第XI卷附錄C“管道缺陷評定”,研究管道缺陷的評估方法和流程,并針對評估流程中最重要的缺陷擴展分析進行了深入研究。同時,利用有限元軟件對線彈性缺陷擴展進行了模擬,獲得了載荷形式與缺陷擴展特性之間的關系,研究了載荷對稱缺陷和非載荷對稱缺陷兩種情況,建立了一套替代規范計算的缺陷擴展計算方法,結果更加準確。此外,對環向貫穿裂紋的擴展和R/t大于20的管道的缺陷擴展特性進行了初步的探討。
[Abstract]:Based on Appendix C of Volume XI of ASME Code "Pipeline defect Evaluation", this paper studies the evaluation method and flow of pipeline defects, and makes a thorough study on the most important defect extension analysis in the evaluation process.At the same time, the linear elastic defect propagation is simulated by the finite element software, and the relationship between the load form and the defect propagation characteristics is obtained. The load-symmetric defect and the non-load-symmetric defect are studied.In this paper, a set of defect expansion calculation method is established, and the results are more accurate.In addition, the propagation characteristics of ring-through cracks and defects in pipelines with R / t > 20 are discussed.
【學位授予單位】：上海交通大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：TM623

【參考文獻】

相關期刊論文 前1條

1 盧黎明;胡兆吉;高勁松;謝志剛;余珂;劉秀英;;失效評定圖技術及其在含缺陷壓力管道安全評定中的應用[J];石油化工設備技術;2006年03期

，

本文編號：1760921