發布時間：2018-01-18 16:13

  本文關鍵詞：智慧照明系統設計與實現　出處：《電子科技大學》2014年碩士論文　論文類型：學位論文

  更多相關文章： 智慧照明 控制技術 調光模塊 網絡控制 GSM控制 語音控制

【摘要】：隨著生活水平的提高,人們對照明系統的要求不再是簡單的提供亮度,而是提供良好視覺效果和方便靈活的控制。傳統的照明系統已經不能滿足人們的需求。因此,便捷的智能化照明系統具有廣闊的應用前景。與傳統的照明系統相比,智能化的照明系統主要有三個方面的優點:豐富的功能應用從而可以營造良好的光環境;方便靈活的控制技術使人們擺脫傳統的控制方式;節約能源,通過對照明環境的監測,在滿足人們的照明需求的同時減少電能的使用。本文分析了智能照明系統的技術發展,根據智能照明的功能需求,結合嵌入式技術、無線通信技術、網絡技術選擇RTT+STM32低功耗、高時效的軟硬件平臺,設計并實現了一個多功能、多控制方式的智慧照明系統。論文首先設計了智慧照明系統的功能目標,并提出系統的總體設計方案。根據系統的整體結構將智慧照明系統劃分為控制中心,照明系統設備節點和控制終端三個部分,并做相應的功能劃分。其次,根據智慧照明系統控制中心的功能作用,設計系統控制中心的軟硬件架構。系統控制中心由網絡模塊、GSM通信模塊、語音控制模塊和Zigbee模塊組成。網絡模塊和GSM模塊的設計為系統控制終端的訪問提供了接口;語音控制模塊主要實現本地的語音口令控制;通過ZigBee組網,系統采用集中控制的方式完成對各個節點信息的收集與控制命令的發送。系統控制中心與控制終端以及各設備節點通信時都采用固定的通信協議。系統控制中心的設計實現了對智慧照明系統的控制與管理。第三,智慧照明系統設備節點的設計,主要完成了照明設備調光模塊與照明環境監測的方案設計與實施,以及與智慧照明系統控制中心的通信。第四,控制終端軟件的設計,通過網絡完成與智慧照明系統控制中心的通信,從而獲取系統與設備的狀態信息,通過友好的交互體驗完成對照明系統的控制與管理。最后對智慧照明系統進行了功能與控制技術的測試,測試結果表明系統達到了預期的設計目標。
[Abstract]:With the improvement of living standards, the requirement of lighting system is no longer simple to provide brightness. It is to provide good visual effect and convenient and flexible control. The traditional lighting system can not meet the needs of people. The convenient intelligent lighting system has a broad application prospect. Compared with the traditional lighting system, the intelligent lighting system has three main advantages: rich functional applications so as to create a good light environment; Convenient and flexible control technology makes people get rid of the traditional control mode; Energy saving, through the monitoring of lighting environment, to meet the lighting needs of people while reducing the use of electricity. This paper analyzes the technological development of intelligent lighting system, according to the functional requirements of intelligent lighting. Combined with embedded technology, wireless communication technology, network technology, RTT STM32 low power consumption, high aging software and hardware platform, designed and implemented a multi-function. This paper first designs the function target of intelligent lighting system, and puts forward the overall design scheme of the system. According to the overall structure of the system, the intelligent lighting system is divided into control center. Lighting system equipment node and control terminal three parts, and do the corresponding functional division. Secondly, according to the intelligent lighting system control center function. The hardware and software architecture of the system control center is designed. The system control center is composed of network module and GSM communication module. The design of the network module and the GSM module provides the interface for the access of the system control terminal. The speech control module mainly realizes the local voice password control. Network through ZigBee. The system adopts centralized control method to collect information from each node and send control commands. The system control center adopts fixed communication protocol when communicating with control terminal and each device node. System control center adopts fixed communication protocol. The design of the intelligent lighting system to achieve the control and management. Third. The design of intelligent lighting system equipment node mainly completes the scheme design and implementation of lighting dimming module and lighting environment monitoring, and the communication with intelligent lighting system control center. 4th. Control terminal software design, through the network to complete the communication with the intelligent lighting system control center, so as to obtain the system and equipment status information. Finally, the function and control technology of the intelligent lighting system are tested, and the test results show that the system has achieved the expected design goal.
【學位授予單位】：電子科技大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：TM923;TN92

【參考文獻】

相關期刊論文 前1條

1 周江;;基于單片機的調光控制器設計[J];電子技術;2010年01期

，

本文編號：1441631