本文選題：直流電場 + 高壓直流電纜��； 參考：《中國電機工程學報》2016年24期

【摘要】：擠壓型高壓電纜用聚合物材料在直流電場作用下,空間電荷的分布具有極性效應。為了揭示引起極性效應的物理機制,該文引入雙極電荷傳輸模型,考慮了雙極性電荷的復合、俘獲、脫陷等傳輸過程以及電極表面電荷的注入。通過參數化分析,辨別影響陰極和陽極空間電荷與電場非對稱分布的主要物理參數。然后利用該模型仿真了均勻直流電場下聚丙烯空間電荷和電場分布,并與實驗結果進行了比較。結果表明:聚丙烯空間電荷的非對稱分布主要由遷移率和脫阱勢壘決定,聚丙烯電場的非對稱分布主要由遷移率和注入勢壘決定,可為聚合物材料的調控提供理論依據。
[Abstract]:The space charge distribution of extruded high voltage cable polymer materials under DC electric field has polarity effect. In order to reveal the physical mechanism of the polarity effect, the bipolar charge transfer model is introduced in this paper. The recombination, capture and detrapping of the bipolar charge and the charge injection on the electrode surface are considered. The main physical parameters which affect the asymmetric distribution of space charge and electric field of cathode and anode are identified by parameterization analysis. Then the space charge and electric field distribution of polypropylene under uniform DC field are simulated and compared with the experimental results. The results show that the asymmetric distribution of space charge of polypropylene is mainly determined by mobility and well barrier, and the asymmetric distribution of electric field of polypropylene is mainly determined by mobility and injection barrier, which can provide a theoretical basis for the regulation of polymer materials.
【作者單位】： 福州大學電氣工程與自動化學院;清華大學電機工程與應用電子技術系;
【基金】：國家重點基礎研究發展計劃項目(973項目)(2014CB 239505)~~
【分類號】：TM247

【相似文獻】

相關期刊論文 前7條

1 文，

本文編號：2049476