水冷PEMFC熱管理系統流量跟隨控制策略
本文選題:燃料電池 + 水熱 ; 參考:《化工學報》2017年04期
【摘要】:針對傳統溫度控制策略在水冷型質子交換膜燃料電池(proton exchange membrane fuel cell,PEMFC)工作中水泵和散熱器風扇存在的強耦合性,并為了提高電堆的工作性能和壽命,提出一種流量跟隨電流的溫度控制策略,根據電堆電流變化調節冷卻水流量來控制電堆冷卻水進出口溫差,通過PID控制器調節散熱風扇控制電堆入口溫度。在水冷PEMFC熱管理平臺上對傳統控制策略、流量跟隨控制策略做了實驗對比。結果表明,流量跟隨電流控制策略使冷卻水出口溫度最大超調量減少64.3%,冷卻水出入口溫差最大偏差減少46.7%,調整時間平均縮短73 s,達到了較高的控制精度和響應速度,削弱了水泵和散熱風扇的強耦合作用,流量跟隨電流控制策略能夠滿足PEMFC系統對溫度控制的要求。
[Abstract]:In order to improve the working performance and life of the electric pile , a control strategy for controlling the inlet and outlet temperature of the cooling water is proposed . The temperature difference between the inlet and outlet of the cooling water is controlled by the PID controller . The results show that the maximum overshoot of the cooling water outlet is reduced by 64.3 % , the maximum deviation of the temperature difference between the inlet and outlet of the cooling water is reduced by 64.7 % , the regulation time is shortened by 73 s , the strong coupling effect of the water pump and the heat dissipation fan is reduced , and the flow - following current control strategy can meet the requirement of the control of the temperature control of the system .
【作者單位】: 西南交通大學電氣工程學院;佛山科學技術學院佛山(云浮)氫能產業與新材料發展研究院;
【基金】:國家科技支撐計劃(2014BAG08B01) 國家自然科學基金面上項目(51677157)~~
【分類號】:TM911.4
【相似文獻】
相關期刊論文 前10條
1 任遠;曹廣益;朱新堅;;Particle Swarm Optimization based predictive control of Proton Exchange Membrane Fuel Cell (PEMFC)[J];Journal of Zhejiang University Science A(Science in Engineering);2006年03期
2 楊代軍;馬建新;鄔敏忠;徐麟;;城市大氣污染物對PEMFC性能的影響[J];環境科學與技術;2006年04期
3 郝建新;高現文;高鶴明;;基于COMSOL Multiphysics的PEMFC的數值模擬[J];化學工業與工程;2008年05期
4 黃乃寶;梁成浩;郭華;;拋光液對304鋼在模擬PEMFC陽極環境中電化學行為的影響[J];腐蝕科學與防護技術;2009年02期
5 盧明;徐曄;郭濤;劉淵;;人防地下工程PEMFC電站儲氫方案的選擇[J];低溫與特氣;2010年03期
6 ;Dynamic modeling and simulation test of a 60 kW PEMFC generation system[J];Journal of Zhejiang University-Science A(Applied Physics & Engineering);2011年06期
7 黎潤東;宋珂;章桐;;鍵合圖理論在PEMFC建模的應用[J];佳木斯大學學報(自然科學版);2011年04期
8 ;Experimental and numerical studies of micro PEM fuel cell[J];Acta Mechanica Sinica;2011年05期
9 李艷昆;陳維榮;程站立;游志宇;;基于PEMFC分布式發電系統的動態特性分析[J];可再生能源;2011年05期
10 ;Influence of PTFE on Electrode Structure for Performance of PEMFC and 10-Cells Stack[J];Chinese Journal of Mechanical Engineering;2012年06期
相關會議論文 前10條
1 ;Hydrogen supply system for a 200 watt PEMFC[A];2008 International Hydrogen Forum Programme and Abstract[C];2008年
2 ;The current progress of PEMFC cold start models[A];2008 International Hydrogen Forum Programme and Abstract[C];2008年
3 ;Recycling of key materials of membrane electrode assembly for PEMFC by acid oxidation method[A];2008 International Hydrogen Forum Programme and Abstract[C];2008年
4 ;Progress of Guangdong 300KW PEMFC power station[A];2008 International Hydrogen Forum Programme and Abstract[C];2008年
5 ;Effect of Driving Cycle on the performance of PEMFC and microstructure of membrane electrode assembly[A];2008 International Hydrogen Forum Programme and Abstract[C];2008年
6 ;Carbon cloth based on PAN carbon fiber practicability for PEMFC applications[A];2008 International Hydrogen Forum Programme and Abstract[C];2008年
7 ;Experiment of gravity effect on PEMFC[A];2008 International Hydrogen Forum Programme and Abstract[C];2008年
8 ;Rapid Prototyping Bipolar Plate of PEMFC by Gelcasting[A];第七屆全國氫能學術會議論文集[C];2006年
9 ;Rapid Prototyping Bipolar Plate of PEMFC by Gelcasting[A];第七屆全國氫能學術會議專輯[C];2006年
10 ;In-situ production of CO-free hydrogen for PEMFC application by methane catalytic decomposition integrated with Pd membrane hydrogen separation[A];2008 International Hydrogen Forum Programme and Abstract[C];2008年
相關重要報紙文章 前2條
1 中國科學院長春應用化學研究所陸天虹;燃料電池汽車商業化前景看好[N];中國化工報;2002年
2 董釋倫;氫離子交換膜燃料電池前景看好[N];解放日報;2001年
相關博士學位論文 前10條
1 王紅星;PEMFC流場與電池性能的模擬研究[D];天津大學;2005年
2 張潔婧;PEMFC電極微觀結構模擬[D];天津大學;2012年
3 彭飛;基于PEMFC的現代有軌電車混合動力系統關鍵技術研究[D];西南交通大學;2014年
4 任遠;質子交換膜燃料電池(PEMFC)的智能建模優化與控制研究[D];上海交通大學;2008年
5 邵玉艷;PEMFC鉑/碳納米管催化劑穩定性和電極制備新方法[D];哈爾濱工業大學;2006年
6 衛國愛;車用PEMFC空氣供給系統建模及控制策略研究[D];武漢理工大學;2010年
7 陳昀;儲氫合金代鉑作為PEMFC和AFC陽極催化材料的電化學過程與電催化特性研究[D];浙江大學;2002年
8 劉宗浩;用于PEMFC的石墨/聚合物復合材料雙極板研究[D];天津大學;2005年
9 駱兵;凝膠注模工藝研究及其在制備PEMFC雙極板中的應用[D];南京理工大學;2007年
10 王樂萍;基于PEMFC的溫差能驅動水下滑翔器能源系統研究[D];天津大學;2012年
相關碩士學位論文 前10條
1 陳冬浩;自增濕空冷型PEMFC特性的實驗分析[D];西南交通大學;2015年
2 張海峰;PEMFC不銹鋼雙極板表面改性碳基薄膜及其特性研究[D];浙江工業大學;2015年
3 王志文;PEMFC堆輸出性能影響分析與膜含水量監測方法研究[D];中國計量學院;2015年
4 趙雨晴;計及電壓一致性的kW級空冷型PEMFC動態響應研究[D];西南交通大學;2016年
5 曹洪;便攜式PEMFC移動電源系統的設計與實現[D];西南交通大學;2016年
6 周博洋;PEMFC的容錯控制研究[D];電子科技大學;2016年
7 陶澤炎;基于內阻檢測的PEMFC溫濕度特性及控制規則研究[D];中國計量大學;2016年
8 童鵬;面向PEMFC輸出性能優化的EIS頻率正割角方法研究[D];中國計量大學;2016年
9 趙巍;系統建模與仿真在PEMFC中的應用研究[D];山東大學;2005年
10 張志明;PEMFC系統的建模及其仿真研究[D];上海海事大學;2006年
,本文編號:2030166
本文鏈接:http://www.sikaile.net/kejilunwen/dianlidianqilunwen/2030166.html