基于多級滯環控制器的永磁同步電機直接轉矩控制
發布時間:2018-05-09 02:29
本文選題:永磁同步電機 + 直接轉矩控制。 參考:《中國電機工程學報》2017年14期
【摘要】:該文提出一種多級滯環控制器與基于離散占空比的擴展開關表相結合的新型直接轉矩控制策略。該策略可以在保證系統具有快速響應能力的前提下有效地降低磁鏈和轉矩波動。所提出的多級滯環控制器將轉矩、磁鏈誤差大小劃分成若干等級,從而能夠更詳盡的描述系統需要增、減轉矩或磁鏈的程度。文中對占空比進行離散化處理,在此基礎上生成不同幅值、不同相角的矢量作為備選矢量,豐富和擴展了傳統DTC開關表。此外,本文采用倒三角矩陣存儲備選矢量集合,并采用"二次尋優"的方法準確、快速地從擴展開關表中選出目標矢量。最后對本文算法的可行性與有效性進行了實驗驗證。
[Abstract]:In this paper, a novel direct torque control strategy based on multistage hysteresis controller and extended switch table based on discrete duty cycle is proposed. This strategy can effectively reduce flux chain and torque ripple while ensuring the fast response ability of the system. The proposed multistage hysteresis controller divides the torque and flux error into several classes, which can describe in detail the degree of torque or flux chain that the system needs to increase or decrease. In this paper, the duty cycle is discretized, on the basis of which different amplitudes and different phase angles are generated as alternative vectors, which enriches and extends the traditional DTC switching table. In addition, the inverted triangular matrix is used to store the set of alternative vectors, and the method of "quadratic optimization" is used to select the target vectors quickly from the extended switch table. Finally, the feasibility and effectiveness of the algorithm are verified by experiments.
【作者單位】: 天津大學電氣自動化與信息工程學院;天津市電機系統先進設計與智能控制技術工程中心;
【基金】:國家自然科學基金項目(51407127) 國家重點基礎研究發展計劃項目(973計劃)(2013CB 035600)~~
【分類號】:TM341;TP273
【相似文獻】
相關期刊論文 前2條
1 ;電源與電源管理[J];電子設計技術;2000年01期
2 ;[J];;年期
,本文編號:1864174
本文鏈接:http://www.sikaile.net/kejilunwen/dianlidianqilunwen/1864174.html
最近更新
教材專著