本文關鍵詞：純銀觸頭熔橋行為高速攝像研究　出處：《貴金屬》2016年S1期 　論文類型：期刊論文

  更多相關文章： 純銀觸頭 電接觸 熔橋 高速攝像

【摘要】：采用自主設計的電接觸-高速攝像試驗系統,在直流單分?jǐn)嗄Ｊ较聦?duì)純銀觸頭在電接觸過程中所發生的熔橋行為進行觀測,從而在不同的電流條件下對電接觸過程中熔橋的形貌尺寸進行研究,同時通過SEM對電接觸熔橋行為作用后純銀觸頭的表面進行形貌分析。結果表明,在DC 10 V(8~20 A)條件下,純銀觸頭在電接觸過程中形成的熔橋有圓柱型和啞鈴型2種形貌,并且其尺寸為微米級;熔橋的直徑和長度都隨電流的增大而呈現出先減小后增大的趨勢,10~15 A范圍內純銀觸頭在電接觸過程中不易形成熔橋,電接觸過程中電弧可能先于熔橋而產生,并且熔橋和電弧現象可以同時存在。
[Abstract]:Using the self-designed electrical contact-high speed camera test system, the melting bridge behavior of pure silver contacts during electrical contact was observed in DC single break mode. At the same time, the surface morphology of pure silver contact was analyzed by SEM under different current conditions. Under the condition of DC 10 V ~ (8) C ~ (20 A), the fused bridge formed in the electric contact process of pure silver contacts has two morphologies: cylindrical and dumbbell-shaped, and the size of the bridge is of micron order. The diameter and length of the bridge decrease first and then increase with the increase of current. The pure silver contact is not easy to form the fusion bridge in the range of 1015A during electric contact. The arc may occur earlier than the fusion bridge during electric contact, and the melting bridge and arc phenomenon can exist at the same time.
【作者單位】： 昆明貴金屬研究所稀貴金屬綜合利用新技術國家重點實驗室;
【分類號】：TM206
【正文快照】： 電觸頭作為承擔接通和分?jǐn)嚅_關電器電路的核心元件,主要用于繼電器、接觸器和小型斷路器等電接觸領域中,其性能好壞直接影響開斷容量、使用壽命和運行可靠性[1-3]。貴金屬電接觸材料具有較高的導電和導熱性、高化學穩定性、低而穩定的接觸電阻、高抗熔焊性和抗電弧侵蝕等優良，

本文編號：1356095