不飽和聚酯樹脂瀝青路面冷補材料的制備及性能研究
[Abstract]:With the rapid development of our economy and the construction of public transport network structure, the rapid expansion of urbanization in China has led to the large-scale development of highway construction. This also makes asphalt pavement more and more widely used. However, among the roads paved by many of the asphalt pavements that have been built, it has been found that the routine maintenance work is not in place, The problems caused by large-scale pavement diseases caused by the early minor diseases of pavement, such as failure to deal with them in time, have affected the normal use and opening of roads, Therefore, how to carry out daily maintenance and early repair of asphalt pavement should be paid more and more attention to in public transportation. At present, the common methods of asphalt pavement maintenance and repair are usually made of modified asphalt or emulsified asphalt, which requires heating operation of different processes in the process of maintenance, which is not only expensive, but also expensive. And it has a great influence on the natural environment, so it is of great social significance to study the unsaturated polyester resin asphalt pavement cold filling material in this paper. Unsaturated polyester resin cold supplement materials are coarse and fine aggregates which are added to unsaturated polyester at room temperature to promote curing at room temperature and supporting strength respectively. After mixing evenly, some early diseases of asphalt pavement are maintained and repaired by filling joint. Based on the study of a large number of related documents, a large number of basic experiments and single factor comparative experiments were carried out to determine the properties of cold supplementary materials in curing time, flow performance and strength, etc. The relationship between the distribution ratio of cold supplement materials and the relative properties was studied, and the initial ratio of unsaturated polyester resin cold supplement materials was determined by comparing the properties of cold supplementary materials made with different ratios. On the basis of obtaining the initial proportion, the influence of the distribution ratio of each group on the properties of the product was studied by orthogonal experiment, and the optimum proportion was obtained.
【學位授予單位】:長安大學
【學位級別】:碩士
【學位授予年份】:2015
【分類號】:U414;U418.6
【相似文獻】
相關期刊論文 前10條
1 曲向進;淺談高速公路瀝青路面設計[J];東北公路;2001年02期
2 王守立,麻虹艷;瀝青路面防水措施初探[J];遼寧交通科技;2001年05期
3 李愉平;瀝青路面質量管理與控制[J];青海交通科技;2003年04期
4 李江,封晨輝;永久性瀝青路面[J];石油瀝青;2005年03期
5 張雁,李維生,趙塵;高速公路瀝青路面纖維穩定料的發展綜述[J];內蒙古農業大學學報(自然科學版);2005年01期
6 曹衛東,陳旭,呂偉民;簡述國內外低噪聲瀝青路面研究狀況[J];石油瀝青;2005年01期
7 宋秀蘭;楊英;;英試驗多孔瀝青路面[J];建筑工人;2006年02期
8 卜偉;;瀝青路面熱風加熱的計算[J];建設機械技術與管理;2006年04期
9 賈渝;;2008年瀝青路面與環境專題研討會信息[J];現代交通技術;2006年03期
10 關書敏;;國內第一條景區橡膠瀝青路面鋪就通車[J];公路交通技術;2006年04期
相關會議論文 前10條
1 程杰;;加強全面管理防止瀝青路面水破壞[A];土木建筑學術文庫(第10卷)[C];2008年
2 劉韓英;張忠光;孫紅蘭;;淺談瀝青路面的養護與維修[A];山東水利科技論壇2006[C];2006年
3 王佐民;呂偉民;;低噪聲瀝青路面的聲學特性[A];面向21世紀的科技進步與社會經濟發展(上冊)[C];1999年
4 位俊濤;劉曉兵;;淺談瀝青路面施工質量控制——以新密市滎密路施工為例[A];土木建筑學術文庫(第13卷)[C];2010年
5 姬東;李黎;;瀝青路面水破壞原因分析與設計探討[A];第四屆河南省汽車工程科技學術研討會論文集[C];2007年
6 李承斌;穆杰;邵龍?zhí)?;微波加熱瀝青路面及其控制的研究[A];“第十四屆全國微波能應用學術會議”暨“2009年微波創造美的生活高峰論壇”論文集[C];2009年
7 張澤文;;高速公路瀝青路面關鍵施工質量管理實踐[A];湖北省公路學會二○○九年學術年會論文集[C];2010年
8 錢國超;;江蘇高速公路瀝青路面“十五”技術回顧與展望[A];江蘇省公路學會優秀論文集(2006-2008)[C];2009年
9 萬里鵬;程琳;;淺談瀝青路面水破壞的原因及防治措施[A];土木建筑學術文庫(第10卷)[C];2008年
10 楊海鷗;呂松年;;合理選擇瀝青路面設計結構方案[A];土木建筑學術文庫(第9卷)[C];2008年
相關重要報紙文章 前10條
1 記者 王珍珍;美專家提出系統考慮瀝青路面質量[N];中國交通報;2006年
2 記者 楊寶眾 特約記者 王麗霞;技術交流有助提升中國瀝青路面水平[N];中國交通報;2006年
3 趙會;岷江大道瀝青路面全面開鋪[N];眉山日報;2008年
4 王遠洋 孫燕 程佳祺;城市非主干道推廣瀝青路面[N];蚌埠日報;2009年
5 周瑞華;“衡大高速”瀝青路面“就地再生”[N];衡陽日報;2010年
6 記者 白秋薇;陜西:瀝青路面耐久研究通過驗收[N];中國交通報;2010年
7 榮磊 春燕;我省要求40%瀝青路面循環利用[N];新華日報;2011年
8 駐張家港首席記者 王樂飛 通訊員 蔣恒;港城“嘗鮮”瀝青路面修復新技術[N];蘇州日報;2011年
9 實習記者 賴囝楠;浙江高速公路瀝青路面“換顏”[N];中國交通報;2011年
10 實習生 李茜邋楊捷;彩色瀝青路面制作“獨占鰲頭”[N];長江日報;2007年
相關博士學位論文 前10條
1 肖川;典型瀝青路面動力行為及其結構組合優化研究[D];西南交通大學;2014年
2 劉圣潔;基于江西南部地區溫度條件的瀝青路面健康性能預測[D];長安大學;2015年
3 周澤洪;基于四川氣候和軸載要求的半剛性基層瀝青路面設計研究[D];長安大學;2015年
4 耿立濤;瀝青路面溫度應力及超孔隙水壓力計算[D];大連理工大學;2009年
5 王書云;基于生心理因素的瀝青路面性能關鍵參數研究[D];北京工業大學;2010年
6 黃志義;特長隧道瀝青路面火災過程燃燒機理與安全性試驗研究[D];浙江大學;2007年
7 聶鵬;遼寧省瀝青路面合理結構類型與區劃原理的研究[D];哈爾濱工業大學;2007年
8 關彥斌;大孔隙瀝青路面的透水機理及結構設計研究[D];北京交通大學;2008年
9 羅輝;瀝青路面粘彈性響應分析及裂紋擴展研究[D];華中科技大學;2007年
10 王端宜;設計瀝青路面及其方法的研究[D];華南理工大學;2003年
相關碩士學位論文 前10條
1 梅作舟;基于混合Lagrange-Euler算法的高速公路瀝青路面疲勞損害研究[D];西南交通大學;2015年
2 李亮;典型瀝青路面罩面施工工藝及質量管理[D];西南交通大學;2014年
3 趙耀華;基于性能的瀝青路面施工控制技術研究[D];鄭州大學;2015年
4 曹玉華;季凍區高等級公路柔性基層瀝青路面合理結構及使用性能研究[D];長安大學;2015年
5 劉世偉;瀝青路面冷銑刨切削機理研究[D];長安大學;2015年
6 張勇;瀝青路面施工設備作業質量指標體系與施工技術研究[D];長安大學;2015年
7 熊海珍;提高青海省瀝青路面耐久性的技術措施研究[D];長安大學;2015年
8 高建綱;城市瀝青路面施工質量控制研究[D];長安大學;2015年
9 張丹妮;不飽和聚酯樹脂瀝青路面冷補材料的制備及性能研究[D];長安大學;2015年
10 崔慕源;新疆某高速公路瀝青路面中長期養護措施研究[D];長安大學;2015年
,本文編號:2135111
本文鏈接:http://www.sikaile.net/kejilunwen/daoluqiaoliang/2135111.html