本文關鍵詞：基于孔壓靜力觸探力學分層的土體邊界識別方法研究　出處：《巖土力學》2017年05期 　論文類型：期刊論文

  更多相關文章： 孔壓靜力觸探 土層邊界識別 力學分層法 統計分析

【摘要】：對于巖土工程設計來說,準確識別均質土層的邊界是極其重要的。孔壓靜力觸探(CPTU)測試數據常用于土分類、土層邊界識別和巖土工程參數評價等方面�；贑PTU測試數據,利用統計分析方法進行力學分層,可以有效地識別均質土層邊界。采用組內相關系數法和修正的Bartlett檢驗,對CPTU測試數據進行統計分析,生成相應的組內相關系數指標RI和Bartlett統計量。結合R_I和修正的Bartlett統計量臨界值,檢驗土體的均質性,確定均質土層的邊界,從而進行力學分層。利用3個場地的CPTU數據進行力學分層,并將其結果與土性分層結果進行對比。結果表明,力學分層結果不僅能分辨出全部主要的土性分層界面,而且還顯示更多潛在的次級力學分層界面。
[Abstract]:For the geotechnical engineering design, accurate identification of homogeneous soil layer boundary is extremely important. Piezocone Penetration Test (CPTU) test data used for soil classification, soil boundary identification and geotechnical parameters evaluation. CPTU based on the test data, analysis method for mechanical stratification using statistics, can effectively identify the homogeneous soil the boundary. Using Bartlett test correlation coefficient method and the modified group, statistical analysis of CPTU test data, generate the corresponding intraclass correlation coefficient index RI and Bartlett statistics. Combining with the critical value of Bartlett statistics and modified R_I test, soil heterogeneity, determine the homogeneous soil boundary, thus the mechanical mechanics hierarchical stratification. The 3 sites of CPTU data, and compared the results with soil stratification results. The results show that mechanical stratification results can not only distinguish all the main points of soil The layer interface also shows more potential secondary mechanical stratification interfaces.

【作者單位】： 東南大學巖土工程研究所;東南大學江蘇省城市地下工程與環境安全重點實驗室;
【基金】：國家重點研發計劃課題(No.2016YFC0800201) 國家自然科學基金項目(No.41672294) 江蘇省杰出青年基金項目(No.BK20140027)~~
【分類號】：TU413
【正文快照】： 正確識別均質土層的邊界是巖土工程勘察的重要內容。對于巖土工程設計,在確定地基土的工程性質指標和參數時,如樁的持力層、地基承載力及抗震液化特性等,準確地識別均質土層的邊界是極其重要的。而且,土工參數的統計分析只對于均質土層內的土體來說是有意義的。Baecher指出[1]，

本文編號：1414917