本文選題：氮?dú)廨o助熱處理 + 制冷機械外殼�。� 參考：《現代制造工程》2017年08期

【摘要】：分別采用常規熱處理和氮?dú)廨o助熱處理對制冷機械外殼材料進行了退火處理,并進行了材料的顯微組織、耐磨損性能和阻尼性能的測試與分析。結果表明,與常規熱處理相比,氮?dú)廨o助熱處理顯著改善了材料的耐磨損性能和阻尼性能;使材料的25℃和150℃磨損體積分別減小65%、77%,25℃阻尼性能增加84%;隨著頻率從0.2Hz提高到1.0Hz,材料的阻尼性能從84%降至35%。
[Abstract]:The shell materials of refrigeration machinery were annealed by conventional heat treatment and nitrogen assisted heat treatment, and the microstructure, wear resistance and damping properties of the materials were tested and analyzed. The results show that compared with conventional heat treatment, nitrogen assisted heat treatment has significantly improved the wear resistance and damping properties of the materials. The wear volume at 25 鈩，

本文編號：2057794