本文選題：板對板射頻同軸連接器 + 轉接器��； 參考：《南京航空航天大學》2014年碩士論文

【摘要】：隨著無線通訊技術的不斷發展,板對板射頻同軸連接器在無線系統模塊互聯中的應用越來越廣泛,鑒于目前無線設備市場發展的趨勢對連接器的要求是更小、更輕、更廉價,板對板同軸連接器也向著大容差、高功率、小型化的方向發展。目前,我國板對板射頻同軸連接器的產品還比較少,所以研發具有自主知識產權的板對板同軸連接器的界面研究與設計具有重要的工程應用價值。本文的主要研究內容如下:1.研究了射頻同軸連接器幾種常用的阻抗不連續性補償方法,通過算例驗證了補償方法的正確性,并利用HFSS的時域功能,針對一款板對板連接器的焊盤結構進行了優化設計。2.在分析對比了現有板對板同軸連接器界面的優缺點的基礎上,提出了一種新的板對板連接器界面,并根據該新界面設計了一款加長型SMP連接器,該連接器具有軸向容差大的優點,其軸向容差可達1.2mm,是傳統SMP板對板連接器的兩倍。通過實物的加工和測試,結果表明該連接器在DC~6GHz具有良好的電氣性能,滿足設計指標。3.根據加長型SMP界面,設計了一款加長型SMP-SMA3.5轉接器,文中給出了詳細的設計過程,由于內導體尺寸變換造成的臺階面和絕緣支撐引入的臺階面分別運用了錯位補償和共面補償方法,HFSS的仿真結果表明,經過補償后的連接器的駐波比(VSWR)得到明顯改善。經過實物測試,結果表明在DC~10GHz頻率范圍內該轉接器的駐波比(VSWR)均在1.2以內,滿足指標要求。
[Abstract]:With the development of wireless communication technology, board to board RF coaxial connectors are more and more widely used in wireless system module interconnection. In view of the current trend of wireless equipment development, the requirements for connectors are smaller, lighter and cheaper. Plate-to-board coaxial connectors are also developing towards large tolerance, high power and miniaturization. At present, there are few products of radio-frequency coaxial connectors in China, so the research and design of the interface of coaxial connectors with independent intellectual property has important engineering application value. The main contents of this paper are as follows: 1. Several commonly used impedance discontinuity compensation methods for RF coaxial connectors are studied. The correctness of the compensation method is verified by an example. Using the time domain function of HFSS, the paper optimizes the design of the pad structure of a plate-to-plate connector. On the basis of analyzing and comparing the advantages and disadvantages of the existing plate to plate coaxial connector interface, a new board to board connector interface is proposed, and an extended SMP connector is designed according to the new interface. The connector has the advantage of large axial tolerance, and its axial tolerance can reach 1.2 mm, which is twice as much as that of the traditional SMP board connector. Through processing and testing, the results show that the connector has good electrical performance at DCG 6GHz and meets the design index of .3. According to the extended SMP interface, an extended SMP-SMA 3.5 adapter is designed, and the detailed design process is given in this paper. The results of HFSS simulation show that the standing wave ratio (VSWR) of the connectors after compensation has been improved obviously by using the offset compensation and coplanar compensation method respectively for the step surface caused by the inner conductor dimension change and the step surface introduced by the insulation support. The results show that the standing wave ratio (VSWR) of the converter is within 1.2 in the frequency range of 10 GHz, which meets the requirements of the target.
【學位授予單位】：南京航空航天大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：TM503.5
，

本文編號：2057319