【摘要】：對電外科儀器輸出的高壓和大電流參數進行準確檢測是研制反饋式電外科儀器的基礎。為此,本文研制基于PC機的輸出參數測量系統,對電外科儀器輸出的高壓和大電流信號進行隔離感應、放大、濾波、差分信號變單端信號、有效值轉換,最后通過DAQ采集卡進行模數轉換,數據送入PC機中使用Labview軟件進行過采樣、顯示和存儲等處理。實驗結果表明,該系統能夠?qū)﹄娡饪苾x器的輸出參數進行穩定測量,結果準確。因此,該系統的研制是成功的,在此基礎上開發嵌入式的輸出參數測量系統,能夠?yàn)橹悄苁降碾娡饪苾x器開發提供準確的反饋信息。
[Abstract]:The accurate detection of high voltage and high current parameters of electric surgical instruments is the basis of the development of feedback electric surgical instruments. For this reason, an output parameter measurement system based on PC is developed in this paper. The high voltage and high current signals outputted by electric surgical instruments are isolated and induced, amplified, filtered, differential signals become single-ended signals, and the effective values are converted. Finally, the analog-to-digital conversion is carried out through DAQ acquisition card, and the data is sent to PC for over-sampling, display and storage by Labview software. The experimental results show that the system can measure the output parameters of electric surgical instruments stably, and the results are accurate. Therefore, the development of the system is successful, on the basis of which the embedded output parameter measurement system can provide accurate feedback information for the development of intelligent electrical surgical instruments.
【作者單位】： 上海理工大學醫療器械與食品學院;
【基金】：上海市科委資助項目(10441900900) 上海市教委科研創新項目資助項目(12YZ102) 上海市優秀青年教師科研專項基金(slg10020)
【分類號】：R318.6

【參考文獻】

相關期刊論文 前1條

1 李剛;張麗君;林凌;何峰;;基于過采樣技術的生物電信號檢測[J];電子學報;2008年07期

【共引文獻】

相關期刊論文 前10條

1 鄒宇杰;胡永建;;基于過零點檢測的高分辨率DAC靜態測試方法研究[J];電子技術;2011年09期

2 李剛;周梅;何峰;林凌;;基于數字鎖相相關計算結構的優化算法[J];電子與信息學報;2012年03期

3 李剛;趙U，

本文編號：2494750