【摘要】：通過對人造板基材和貼面材料(薄木)的含水率調整處理、完全去除基材表面的致密硬化層、熱壓過程參數控制及熱壓后貼面裝飾板的養護等工藝技術的創新,以改進傳統薄木貼面的生產工藝。試驗結果表明:技術創新后的人造板基材貼薄木飾面板件的尺寸偏差小,翹曲變形≤1%,貼面裝飾板的浸漬剝離長度為20 mm,表面膠合強度0.5 MPa,貼面質量得到保證,貼面板件的理化性能更加優異,產品合格率提高60%以上。
[Abstract]:By adjusting the moisture content of the wood base material and veneer material (thin wood), the dense hardening layer on the substrate surface, the control of the hot pressing process parameters and the maintenance of the veneer decoration board after hot pressing are completely removed. In order to improve the traditional thin wood veneer production process. The experimental results show that the dimension deviation of the wood-based panel is small, the warping deformation is 鈮，

本文編號：2399712