【摘要】：隨著農業機械智能化水平的不斷提高,無人駕駛農機進行自主作業的研究也在快速的發展。實時、準確地對插秧機的工況和栽植質量進行監控,以及在發生故障時能及時地報警是插秧機高效、安全作業的重要保障,能夠有效提高作業效率、降低安全隱患。本文設計了一套無人插秧機遠程監控系統,由插秧機機載終端和遠程監控中心兩部分構成,采用C/S架構進行通信。插秧機采集其作業的工況檢測信息、定位信息和經過圖像算法處理后得到的秧苗栽植質量信息,通過GPRS網絡上傳到遠程監控中心。遠程監控中心以人機界面形式實時顯示機載工況信息,并在地圖上直觀呈現其作業位置和栽植質量。此外,對于異常數據還可以進行報警提示,以及下發命令實現對插秧機的控制。首先,論文闡述了無人插秧機和遠程監控系統的國內外研究現狀,在分析系統機載終端和遠程監控中心功能需求的基礎上提出了系統的總體設計方案,并介紹了系統的結構組成和工作原理,對系統開發涉及到的GPS、GIS、GPRS以及Socket技術進行了概述。其次,搭建了插秧機機載終端總體框架,以工控機為機載處理器,外接GPS接收機、GPRS通信模塊、攝像頭以及數據采集卡,對機載終端硬件功能模塊進行了選型和設計。在此基礎上采用VC開發環境對機載終端軟件程序流程進行了設計,主要包括對采集的插秧機各類工況信息分類處理,通信程序的軟件實現,以及利用圖像匹配、圖像分割和BP神經網絡等算法對采集的秧苗圖進行狀態檢測和等級處理。接著,在插秧機機載終端軟硬件設計的基礎上,進一步設計了相應的遠程監控中心。圍繞數據庫、服務器以及監控客戶端這三個方面,詳細介紹了遠程監控中心的設計和實現過程。運用Socket和多線程技術完成了數據通信和遠程控制,利用數據庫技術對接收的數據進行了存儲和管理。另外,采用VC開發了良好的監控客戶端人機界面,并使用GIS技術實現了插秧機實時定位顯示和秧苗栽植質量地圖直觀呈現。最后,對插秧機的主要硬件模塊進行了功能測試,并在此基礎上對監控系統的各個功能模塊進行了調試。經驗證,該監控系統基本實現了對遠程作業插秧機進行實時監控的功能。
[Abstract]:With the improvement of intelligent level of agricultural machinery, the research of autonomous operation of unmanned agricultural machinery is developing rapidly. Monitoring the working condition and planting quality of transplanter in real time and accurately, and alarming in time in case of failure are the important guarantee of high efficiency and safe operation of transplanter, which can effectively improve the working efficiency and reduce the hidden danger of safety. In this paper, a remote monitoring system for unmanned transplanter is designed, which is composed of two parts: the airborne terminal and the remote monitoring center of the transplanter. The communication system is based on C / S architecture. The transplanter collects the working condition detection information, the location information and the seedling planting quality information after processing the image algorithm, and uploads it to the remote monitoring center through the GPRS network. The remote monitoring center displays the airborne working condition information in real time in the form of man-machine interface, and visualizes its working position and planting quality on the map. In addition, the abnormal data can be alerted and ordered to control the transplanter. First of all, the paper describes the research status of unmanned transplanter and remote monitoring system at home and abroad, and puts forward the overall design scheme of the system based on the analysis of the functional requirements of the airborne terminal and remote monitoring center. The structure and working principle of the system are introduced, and the GPS,GIS,GPRS and Socket technology involved in the development of the system are summarized. Secondly, the whole frame of the airborne terminal of the transplanter is built. The industrial control computer is used as the airborne processor, the external GPS receiver, the GPRS communication module, the camera and the data acquisition card. The hardware function module of the airborne terminal is selected and designed. On this basis, the software flow chart of airborne terminal software is designed by using VC development environment, which mainly includes the classification and processing of all kinds of working condition information of the collecting transplanter, the software realization of communication program, and the use of image matching. Image segmentation and BP neural network are used to detect and process the state of the collected seedling map. Then, on the basis of the hardware and software design of the transplanter's airborne terminal, the corresponding remote monitoring center is designed. The design and implementation of remote monitoring center are introduced in detail around database, server and monitoring client. The data communication and remote control are accomplished by using Socket and multithread technology, and the data received are stored and managed by database technology. In addition, a good man-machine interface of monitoring client is developed by using VC, and the real-time positioning display of transplanter and the visual presentation of seedling planting quality map are realized by using GIS technology. Finally, the main hardware modules of the transplanter are tested, and each function module of the monitoring system is debugged. It is verified that the monitoring system basically realizes the function of real-time monitoring of remote working transplanter.
【學位授予單位】：江蘇大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：S223.91;TP277

【參考文獻】

相關期刊論文 前10條

1 關群;;凱斯紐荷蘭工業集團推出無人駕駛概念拖拉機[J];農業機械;2016年09期

2 薛麗霞;羅文浩;王佐成;;動態背景下基于ORB特征匹配的運動目標檢測算法[J];計算機應用與軟件;2015年10期

3 馮亦東;孫躍;;基于SURF特征提取和FLANN搜索的圖像匹配算法[J];圖學學報;2015年04期

4 熊中剛;賀娟;曲祥君;陳連貴;葉振環;敖邦乾;;插秧機作業面積自動測量系統硬件電路設計[J];湖北農業科學;2015年14期

5 胡靜濤;高雷;白曉平;李逃昌;劉曉光;;農業機械自動導航技術研究進展[J];農業工程學報;2015年10期

6 李強;;著力推進農機化轉型升級 加快實現農業生產領域“機器換人”[J];現代農機;2014年04期

7 郭娜;胡靜濤;王鶴;;基于GPS導航的插秧機作業控制系統[J];農業機械學報;2013年01期

8 郭強;;ADO技術在VC編程中的研究及應用分析[J];電子科技;2013年01期

9 史國濱;王熙;莊衛東;;基于Google Maps的農業機械作業軌跡監測系統[J];農業機械學報;2012年11期

10 劉樹勇;楊慶超;位秀雷;吳海平;;鄰近點快速搜索方法在混沌識別中的應用[J];華中科技大學學報(自然科學版);2012年11期

相關碩士學位論文 前8條

1 曲承童;汽車減振器雙動耐久性試驗臺設計[D];長春理工大學;2013年

2 蔣鵬鵬;小型無人插秧機關鍵部件動力學分析與實驗研究[D];浙江理工大學;2012年

3 馬志強;基于GPS與GPRS的車載終端的設計[D];武漢理工大學;2012年

4 蘭東云;無線監控通用信息平臺的開發與研究[D];華中科技大學;2009年

5 程一沛;基于GPS/GIS/GPRS的車輛監控管理系統的設計與開發[D];西安科技大學;2009年

6 呂等叁;面向中小型企業財務管理系統的設計與實現[D];合肥工業大學;2008年

7 宋紅英;基于蟻群神經網絡的發動機故障診斷專家系統的研究[D];中國農業大學;2005年

8 王濤;基于移動通信網絡機器人遙操作系統設計與實現[D];國防科學技術大學;2003年

，

本文編號：2305051