本文關鍵詞：基于嵌入式的無線視頻監控系統設計與實現　出處：《廣西師范大學》2017年碩士論文　論文類型：學位論文

  更多相關文章： 嵌入式 視頻監控 Linux Qt Android

【摘要】：隨著社會的不斷發展與進步,人們的安防意識逐漸增強,視頻監控系統以其準確、直觀和高效的特點,在安防領域得到了廣泛的應用。傳統的視頻監控系統大多是以有線網絡為主,其安裝布線工程量大、移動性差且成本高。隨著WiFi、4G等無線傳輸技術及嵌入式技術的發展,視頻監控系統正朝著無線化、小型化和低成本等方向發展。本文通過研究無線視頻監控的關鍵技術,設計出了一個基于嵌入式的無線視頻監控系統。該系統包括三部分,分別為監控前端、中心服務器和移動監控終端。中心服務器創建WiFi熱點,監控前端和移動監控終端分別接入WiFi熱點與中心服務器無線連接,從而克服了有線監控技術的缺陷。本文完成的主要研究工作如下:(1)根據本文設計的內容和需求,提出了基于嵌入式的無線視頻監控系統總體設計方案,并分別提出了監控前端、中心服務器、移動監控終端的設計方案。(2)搭建了嵌入式服務器的硬件平臺及軟件開發環境,包括嵌入式Linux操作系統的U-Boot移植、內核移植及構建根文件系統。(3)嵌入式服務器應用軟件的開發,完成了多路監控視頻的采集、壓縮編碼及無線傳輸。(4)中心服務器端應用軟件的開發,使用Qt開發與用戶交互的友好界面,完成了多路監控視頻數據的接收與轉發、視頻解碼、視頻存儲、視頻播放及視頻的動態檢測,并對動態視頻進行備份存儲。(5)移動監控終端應用軟件的開發,在Android系統上實現了對多路監控視頻數據的接收及解碼播放等功能。實驗測試結果表明,本文設計的基于嵌入式的無線視頻監控系統達到了系統設計要求,監控視頻圖像清晰流暢,并具有準確性高和實時性好的優點。
[Abstract]:With the continuous development and progress of society, people's security awareness is gradually enhanced, video surveillance system with its accurate, intuitive and efficient characteristics. In the field of security has been widely used. The traditional video surveillance system is mostly wired network, its installation and wiring project is large, mobility is poor and high cost. With WiFi. With the development of wireless transmission technology such as 4G and embedded technology, video surveillance system is developing towards wireless, miniaturization and low cost. A wireless video surveillance system based on embedded system is designed. The system consists of three parts: the front end, the central server and the mobile monitoring terminal. The center server creates the WiFi hotspot. The monitoring front end and the mobile monitoring terminal are connected to the WiFi hot spot and the central server wireless connection respectively. In order to overcome the shortcomings of cable monitoring technology. The main research work completed in this paper is as follows: 1) according to the content and requirements of this paper, the overall design scheme of wireless video surveillance system based on embedded is put forward. And put forward the monitoring front-end, central server, mobile monitoring terminal design scheme. 2) built the embedded server hardware platform and software development environment. Including the U-Boot transplantation of embedded Linux operating system, kernel transplantation and the development of embedded server application software to build root file system. Compression coding and wireless transmission. 4) the development of the application software of the central server, using QT to develop friendly interface with the user, completed the receiving and forwarding of multi-channel surveillance video data, video decoding. Video storage, video playback and video dynamic detection, and dynamic video backup storage. 5) Development of mobile monitoring terminal application software. The functions of receiving and decoding video data are realized on Android system. The experimental results show that. The wireless video surveillance system based on embedded system meets the requirements of system design. The video image is clear and smooth, and has the advantages of high accuracy and good real-time.
【學位授予單位】：廣西師范大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：TN948.6

【相似文獻】

相關期刊論文 前10條

1 魏廣科;;企業無線視頻監控系統的設計與應用[J];計算機與現代化;2010年07期

2 王寧濤;李廣;張毓鋒;臧赤丁;;高速公路無線視頻監控實施分析[J];中國交通信息化;2011年09期

3 羅瑩;祁峗;;淺談3G無線視頻監控的應用[J];移動通信;2011年23期

4 樓q，

本文編號：1440837