本文選題：電解錳渣 + 有效硅�。� 參考：《非金屬礦》2017年06期

【摘要】：利用不同促釋方法對電解錳渣(EMR)中有效硅進行活化,以實現錳渣資源化利用。通過微波焙燒活化、機械球磨及機械復合3種不同方式,考察各方法對硅活化的作用,探索適合錳渣活化的方式,揭示相關活化機理。結果表明,經3種不同方式活化后,錳渣中有效硅含量均得到提高,機械復合活化的方式最好,在球磨時間為40 min,微波焙燒溫度為900℃、m(EMR)/m(Na2CO3)=1∶0.6、焙燒時間為40 min時,采用該方式錳渣中有效硅含量可達16.37%。
[Abstract]:The effective silicon in electrolytic manganese slag EMRs was activated by different releasing methods to realize the utilization of manganese slag. Through microwave roasting activation, mechanical milling and mechanical recombination, the effects of different methods on silicon activation were investigated, and the suitable ways for manganese slag activation were explored, and the related activation mechanism was revealed. The results showed that the content of available silicon in manganese slag was increased after activation in three different ways, and the best way of mechanical composite activation was obtained. When the milling time was 40 min, the microwave calcination temperature was 900 鈩，

本文編號：2007987