【摘要】：虛擬仿真被控對象基于Web3D、數學建模及通信接口技術實現,可分為全虛擬仿真被控對象和半實物仿真被控對象兩類。前者通過S7-ProSim接口與仿真PLC相連,構建控制系統;后者基于硬件通信板卡連接至真實控制系統。兩類對象的應用可有效解決PLC實踐教學中設備昂貴、場地有限、設備維護成本高等問題,完善控制系統設計環節,促進教學標準化、工程化,同時滿足實驗室開放及學生創新的需求。
[Abstract]:Virtual simulation controlled object is based on Web3D, mathematical modeling and communication interface technology. It can be divided into two types: full virtual simulation controlled object and hardware-in-the-loop simulation controlled object. The former is connected with the simulation PLC through the S7-ProSim interface, and the latter is connected to the real control system based on the hardware communication board. The application of the two kinds of objects can effectively solve the problems of expensive equipment, limited space and high maintenance cost in PLC practical teaching, perfect the design of control system, promote the standardization and engineering of teaching, etc. At the same time to meet the laboratory opening and students innovation needs.
【作者單位】： 廈門大學航空航天學院;
【分類號】：G642;TP273-4
，

本文編號：2192994