本文選題：印染機 + PLC��； 參考：《青島大學》2017年碩士論文

【摘要】：印染業是我國的傳統產業,一直為我國的社會經濟發展做出了重要貢獻。同時印染業又是資源消耗高、污染較重的行業,其生產加工工藝的發展改進對產品的質量和能耗會起到重要的作用。當前一些企業的印染設備仍采用過時的控制系統硬件和生產工藝,造成故障率高、維護維修困難、產品質量不能保證等缺點,嚴重影響了生產的正常進行。論文對某老型號印染設備的監控系統進行了重新設計,采用新型控制器和軟件完成升級功能。論文主要內容由以下五部分組成:課題背景及意義、印染機監控系統方案設計、印染機監控系統硬軟件設計、觸摸屏界面設計和系統仿真調試�？刂破鞑捎梦鏖T子S7-300系列PLC替換原控制器,實現配料控制功能。操作監控界面選用西門子MP277型觸摸屏,實現設備參數設置、運行控制、運行狀態監控、故障報警等功能。驗證了所設計系統的可行性。新的監控系統將更好地滿足工藝需求,提高產品質量,操作方便,并提高生產效率。
[Abstract]:Printing and dyeing industry is the traditional industry of our country, has made important contribution to the social and economic development of our country all the time. At the same time, printing and dyeing industry is an industry with high resource consumption and heavy pollution. The development and improvement of production and processing technology will play an important role in product quality and energy consumption. At present, some enterprises still use outdated control system hardware and production technology, resulting in high failure rate, difficult maintenance, product quality can not be guaranteed and other shortcomings, seriously affecting the normal production. The paper redesigns the monitoring system of an old type printing and dyeing equipment, and adopts a new controller and software to complete the upgrade function. The main content of this paper consists of the following five parts: background and significance of the subject, scheme design of printing and dyeing machine monitoring system, hardware and software design of printing and dyeing machine monitoring system, touch screen interface design and system simulation debugging. Siemens S7-300 series PLC is used to replace the original controller to realize the batching control function. Siemens MP277 touch screen is used in the operation monitoring interface to realize the functions of equipment parameter setting, operation control, running state monitoring, fault alarm and so on. The feasibility of the designed system is verified. The new monitoring system will better meet the process requirements, improve product quality, easy to operate, and improve production efficiency.
【學位授予單位】：青島大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：TS190.4;TP277

【參考文獻】

相關期刊論文 前10條

1 王春娥;肖琴;;自動化智能化新技術在紡織企業的應用[J];棉紡織技術;2016年07期

2 衡虎文;;論可持續視角下我國紡織業發展戰略[J];中國市場;2016年03期

3 王譯晗;王利平;;新經濟形勢下紡織印染企業謀求發展的途徑探討[J];染整技術;2015年02期

4 顏躍輝;;染色機溫度自動控制系統中PLC技術的應用研究[J];機械工程師;2014年01期

5 汪海燕;;S7-200PLC在溢流染色機控制系統中的應用[J];機電工程;2013年01期

6 鄒冬;;傳統印染工藝與現代印染技術分析[J];中國新技術新產品;2011年14期

7 呂品;;PLC和觸摸屏組合控制系統的應用[J];自動化儀表;2010年08期

8 范利軍;孫梁艷;;我國紡織產業升級研究[J];北方經貿;2009年11期

9 高玉萍;;基于西門子PLC的紡織廠溫濕度監控系統設計[J];中國高新技術企業;2009年20期

10 周曙紅;宣旭初;;基于PLC及變頻器的印染加濕電氣控制系統[J];絲綢;2009年04期

，

本文編號：2011618