本文選題：金屬材料 + 鉑催化電極��； 參考：《貴金屬》2017年S1期

【摘要】：氧傳感器是車用監控空燃比、保證尾氣排放達標的測量組件,鉑電極是催化傳感器的核心元件。將特定質量比的鉑-鋯復合粉末與有機粘合劑混合,使用三輥軋機軋制制備了催化鉑電極漿料,并將其應用于傳感器上檢測其電性能。結果表明,所得催化鉑電極漿料滿足氧傳感器件的要求,性能良好。
[Abstract]:Oxygen sensor is a measuring module to monitor air-fuel ratio and ensure exhaust emission up to standard. Platinum electrode is the core component of catalytic sensor. The Pt-Zr composite powder with specific mass ratio was mixed with organic binder and the catalytic platinum electrode paste was prepared by three-high rolling mill and applied to the sensor to test its electrical properties. The results show that the catalytic platinum electrode paste meets the requirements of oxygen sensing devices and has good performance.
【作者單位】： 有研億金新材料有限公司;
【分類號】：O646.54;TP212

【相似文獻】

相關期刊論文 前10條

1 羅瑞賢，李英霞，陳靄t，

本文編號：1887896