磁流變橡膠材料隔聲性能數值模擬
本文選題:磁流變彈性體 切入點:橡膠材料 出處:《湘潭大學》2017年碩士論文 論文類型:學位論文
【摘要】:橡膠材料因其優良的降噪特性,廣泛應用于建筑、工業、軍事等領域,并取得了良好的效果。然而傳統橡膠材料只能在一定范圍的聲音頻率起到良好的隔聲效果,不能起到寬頻減噪的效果。為此,許多學者為設定一款能夠在寬頻率內都起到良好隔聲效果的隔聲材料進行了廣泛的分析探索。磁流變彈性體(MRE)是一類可以通過外加磁場改變其力學性能的智能材料。磁流變橡膠材料能夠通過改變外加磁場強度達到增大其最佳隔聲效果頻率范圍的目的,優化提高了其隔聲特性。本論文基于磁流變彈性體分析探討磁流變橡膠材料的隔聲特性,主要包括以下幾個方面:1)應用復雜網絡的理論和方法來研究無磁場下橡膠材料(真空孔隙)的隔聲特性,應用COMSOL軟件分別模擬了內部孔隙為真空時的不同孔隙率下的橡膠材料的隔聲性能,同時還分析探討了橡膠材料的隔聲量與基于真空孔隙的復雜網絡三個主要的基本拓撲統計參數(平均度、平均聚類系數、平均最短路徑長度)之間的聯系。2)在前一步的工作基礎上,將真空孔隙設定為空氣孔隙,應用COMSOL軟件模擬分析其不同孔隙率下的橡膠材料(空氣孔隙)的隔聲性能,并分析探討了其隔聲量與基于空氣孔隙的復雜網絡三個主要的基本拓撲統計參數(平均度、平均聚類系數、平均最短路徑長度)之間的聯系。3)將孔隙設置為磁粉粒子(羥基鐵粉),基于均勻化的方法,應用COMSOL軟件模擬計算出各不同磁通密度下的材料微小變形條件下的等效平均應力,基于此計算出該材料在各不同磁通密度下的等效彈性模量,以此基礎上模擬分析各磁通密度下磁流變橡膠材料的隔聲特性。
[Abstract]:Rubber materials have been widely used in construction, industry, military and other fields because of their excellent noise reduction characteristics. However, the traditional rubber materials can only play a good sound insulation effect in a certain range of sound frequency. It can't reduce the noise of broadband. For this reason, Many scholars have made extensive analysis and exploration on the design of sound insulation material which can achieve good sound insulation effect in wide frequency. Magnetorheological elastomer (Mre) is a kind of intelligent material which can change its mechanical properties by applying magnetic field. Materials. Magnetorheological rubber materials can increase the frequency range of their optimum sound insulation effect by changing the applied magnetic field strength, Based on the analysis of magneto-rheological elastomer, the sound insulation characteristics of magneto-rheological rubber materials are discussed. Mainly including the following aspects: 1) applying the theory and method of complex network to study the sound insulation characteristics of rubber materials (vacuum pores) without magnetic field. The sound insulation properties of rubber materials with different porosity in vacuum were simulated by COMSOL software. At the same time, three main basic topological statistical parameters (average degree, average clustering coefficient) of rubber material sound insulation and complex network based on vacuum pore are analyzed and discussed. The relationship between the average shortest path length). 2) based on the work of the previous step, the vacuum pore is set as air pore, and the sound insulation property of rubber material (air pore) under different porosity is simulated by COMSOL software. The three basic topological statistical parameters (average degree, average clustering coefficient) of the sound insulation and the complex network based on air porosity are analyzed and discussed. The relation between the average shortest path length. 3) set the pore as magnetic particle (hydroxyl iron powder), based on the method of homogenization, using COMSOL software to simulate and calculate the equivalent average stress of the material under different magnetic flux density under the condition of tiny deformation. Based on this, the equivalent elastic modulus of the material at different flux densities is calculated, and the sound insulation characteristics of MRR materials under different flux densities are simulated and analyzed.
【學位授予單位】:湘潭大學
【學位級別】:碩士
【學位授予年份】:2017
【分類號】:TQ330.1;O157.5
【參考文獻】
相關期刊論文 前10條
1 應申舜;盧奐采;姜偉;;多孔橡膠材料聲傳遞損失性能分析:數值結果[J];輕工機械;2014年01期
2 陳文炯;劉書田;;多孔材料吸聲性能分析與設計優化[J];噪聲與振動控制;2012年03期
3 曹曙明;韓寶坤;王昌田;;靜流阻率對泡沫鋁吸聲性能影響的分析[J];聲學與電子工程;2011年04期
4 符曉蘭;卞學海;趙亞萍;蔡再生;;納米Fe_3O_4顆粒及其磁流體的制備與研究[J];東華大學學報(自然科學版);2011年03期
5 劉鵬輝;楊宜謙;姚京川;;多孔吸聲材料的吸聲特性研究[J];噪聲與振動控制;2011年02期
6 張波;陳天寧;;高聲壓激勵下多孔金屬材料的吸聲性能數值計算[J];西安交通大學學報;2010年03期
7 王瑜;;永磁裝置中磁場力的計算[J];磁性材料及器件;2007年05期
8 汪建曉;孟光;;磁流變彈性體研究進展[J];功能材料;2006年05期
9 鄧華夏;龔興龍;張培強;;磁流變彈性體調頻吸振器的研制[J];功能材料;2006年05期
10 張先舟,王奎,吳峰;磁流變閥控制行波壁的實驗研究[J];實驗力學;2005年02期
相關會議論文 前2條
1 宜晨虹;苗天德;慕青松;;顆粒介質力鏈的復雜網絡法研究[A];2014顆粒材料計算力學會議論文集[C];2014年
2 曹真;江萬權;龔興龍;葉興柱;顧瑞;;Fe_3O_4/PMMA納米復合材料的制備及其磁流變性能[A];第六屆中國功能材料及其應用學術會議論文集(3)[C];2007年
相關博士學位論文 前2條
1 廖國江;磁流變彈性體的力學性能及其在振動控制中的應用[D];中國科學技術大學;2014年
2 陳文炯;多孔吸聲材料孔結構與阻尼材料布局優化設計[D];大連理工大學;2014年
相關碩士學位論文 前4條
1 文瑤;周期性開孔阻尼復合板結構的聲學特性研究[D];湖北工業大學;2015年
2 梁小光;基于Virtual.lab的多孔材料吸聲性能仿真研究[D];西南交通大學;2015年
3 王篤勇;板結構隔聲性能數值仿真與實驗驗證[D];哈爾濱工程大學;2012年
4 李章軍;仿生物組織材料的超聲特征阻抗測量儀研究[D];電子科技大學;2009年
,本文編號:1602303
本文鏈接:http://www.sikaile.net/kejilunwen/yysx/1602303.html