低阻抗槽線技術及其應用
[Abstract]:The slot line is composed of a thin slot on the ground conductor surface on one side of the dielectric substrate and no metal conductor on the other side. It is a plane structure transmission line. With the development of microwave integrated circuits, slot transmission lines may become more and more popular. However, the characteristic impedance of the traditional slot line is generally high, which restricts many applications of the slot line. Considering the drawback of slot line, this paper uses metallization through hole and patch loading technology, and puts forward a kind of low characteristic impedance slot line transmission line. The characteristic impedance of this transmission line is much lower than that of traditional slot line. And the characteristic impedance can vary in a wide range. The main work of this paper includes: (1) A kind of metallized and patch loaded slotted transmission line is proposed. The transmission line is etched on both sides of the slot with two rows of periodically metallized overholes, and the metallized perforated array is equivalent to the metal wall. Two metal patches are loaded symmetrically on the other side of the dielectric substrate to further reduce the characteristic impedance of the slot line, and the definitions of the characteristic impedance and propagation constant of the new low impedance slot line are analyzed. The electromagnetic simulation software HFSS is used to calculate the characteristic impedance and propagation constant of this new type of low impedance slot line. The antenna is miniaturized by the step impedance resonator (SIR) principle. Two miniaturized step impedance slot antennas with different thickness are designed, and the performance of these two slot antennas is compared. 3) A dual-band step impedance slot antenna is designed. This kind of slot antenna has the radiation of magnetic current slot and current patch, the first frequency band is slot radiation, the second band is patch radiation, and it has the characteristics of miniaturization, so it has strong application value.
【學位授予單位】:東南大學
【學位級別】:碩士
【學位授予年份】:2017
【分類號】:TN811
【相似文獻】
相關期刊論文 前10條
1 曹菊良;;槽線技術[J];電子技術;1984年06期
2 戎敖生,李嗣范;多層介質槽線的傳輸特性研究[J];電子學報;1989年03期
3 范治波;黃景熙;;在低介電常數基片上寬槽線的特征阻抗的計算[J];電波科學學報;1991年Z1期
4 殷曉星;王群;王春和;沈廣德;張軍蕊;洪偉;;一種探地雷達用的漸變槽線加載天線[J];現代雷達;2006年11期
5 任波;吳鴻超;朱瑞平;何丙發(fā);;漸變槽線天線的參數分析與設計[J];現代雷達;2010年11期
6 張旭春,甄蜀春,張學禮;雙面槽線色散特性的變分分析[J];空軍工程大學學報(自然科學版);2003年03期
7 張旭春;甄蜀春;;雙面槽線傳輸特性的譜域變分分析[J];彈箭與制導學報;2003年S1期
8 周占榮;侯曉輝;;不同結構的線形漸變槽線天線的時域分析[J];科技信息(學術研究);2008年03期
9 宋躍;焦永昌;張福順;王乃彪;;一種新型超寬帶漸變槽線天線設計[J];西安電子科技大學學報;2009年06期
10 李媛,羅賀琴,言華;用時域有限差分法對槽線特性的全波分析(英文)[J];Transactions of Tianjin University;2002年01期
相關會議論文 前9條
1 劉震國;;漸變槽線天線相位中心的研究[A];2009年全國天線年會論文集(下)[C];2009年
2 許慶豐;葉素珍;陳小強;;槽線天線設計及波束展寬方法[A];2009年全國天線年會論文集(上)[C];2009年
3 唐淑君;章文勛;章朋;;用于WiMAX基站的雙頻段漸變槽線天線[A];2009年全國天線年會論文集(下)[C];2009年
4 王心洋;李家林;王建朋;邵維;楊雪松;王秉中;;微帶到槽線過渡結構的共面設計[A];2011年全國微波毫米波會議論文集(上冊)[C];2011年
5 舒楠;張厚;徐海洋;王劍;;共面波導到槽線轉接器的設計[A];2009年全國天線年會論文集(下)[C];2009年
6 張旭春;王積勤;謝軍偉;梁建剛;;新型寬帶集成魔T及和差器的研制[A];2007年全國微波毫米波會議論文集(下冊)[C];2007年
7 陳彥斌;呂善偉;李鈾;張巖;;寬頻帶Vivaldi槽線天線設計與仿真分析[A];2005'全國微波毫米波會議論文集(第三冊)[C];2006年
8 尹民;章文勛;;一種新型微波軟件的應用[A];1999年全國微波毫米波會議論文集(上冊)[C];1999年
9 鄭力昭;殷曉星;洪偉;;毫米波Vivaldi天線[A];2005'全國微波毫米波會議論文集(第三冊)[C];2006年
相關博士學位論文 前2條
1 郭欣;基于混合傳輸線結構的多層平面差分濾波器的研究[D];南京理工大學;2016年
2 蘇明;超寬帶槽線天線的理論研究與設計實現[D];北京郵電大學;2011年
相關碩士學位論文 前5條
1 方婷;微帶/槽線結構平衡帶通濾波器的研究與設計[D];西安電子科技大學;2014年
2 劉剛;基于槽線的小型化微波器件研究[D];浙江理工大學;2017年
3 魯洵洵;低阻抗槽線技術及其應用[D];東南大學;2017年
4 許文淵;基于槽線結構的小型化微波無源元件研究[D];華東交通大學;2013年
5 牟麗雅;基于蟻群系統理論的槽線識別研究與應用[D];武漢理工大學;2010年
,本文編號:2193430
本文鏈接:http://www.sikaile.net/kejilunwen/xinxigongchenglunwen/2193430.html