本文選題：RGB-LED　切入點：可見光通信　出處：《吉林大學》2017年碩士論文

【摘要】：可見光通信(Visible Light Communication)技術由于其低功耗、高速可調制,并且可實現高速數據通信的特性,在幾年之內便受到了世界各界人士的推崇和研究�？梢�(jiàn)光通信的研究局限在于可見光有限的調制帶寬,研究者們已經提出了多種方案進行改進。本設計采用波分復用技術設計了一款通過RGB三基色組成三路信道進行信息傳輸?shù)南到y(tǒng),通過三路LED驅動,將三種顏色的燈光混合為白光,使得在正常照明的同時實現第二功能——信息傳輸。本文首先對可見光通信的背景和研究意義做了詳細介紹,列舉了如今國內外可見光通信的研究現狀,目前許多研究學者的研究項目主要是白光LED通信,基本上都是以熒光型白光LED為主,三基色的研究較少,本文則選擇了對RGB-LED進行通信研究。經過理論研究,設計了系統整體方案,制作出了系統樣機。本系統以ARM7-LPC2148為主控芯片,通過改進的OOK編碼調制將三路信號與三路LED驅動電壓分別進行耦合加載到RGB-LED上進行信息發送。在系統的接收端,使用四種光電探測器對光信號進行接收,然后通過選擇模塊對四路信號中的一路信號進行放大、濾波、整形處理,然后通過接收端的主控芯片LPC2148進行解調解碼,將數據送到液晶屏OLCD12864上進行顯示。系統樣機完成后,對系統進行了測試,該系統的通信速率為8.4KHz,此系統的最佳通信狀態為傳輸距離為1.5cm,光強為33701μx。
[Abstract]:Visible light communication (Visible Light Communication) technology due to its low power consumption, high speed modulation, and can realize the characteristics of high-speed data communication, in a few years it has been the world from all walks of life and respected research. Limitations of visible light communication is visible light modulation bandwidth is limited, researchers have proposed a variety of solutions to improve this design using WDM technology to design a system for information transmission through the RGB three color composition of the three channel, driven by three LED, the three color light mixed into white light, to achieve second functions: information transmission in normal lighting at the same time. This paper made a detailed introduction on the background of visible light communication and research significance, are now at home and abroad for visible light communication, research status, current research project many scholars mainly white LED communication base This was all to fluorescent white light LED, three primary research less, we choose the communication study of RGB-LED. Through theoretical research, the overall design scheme of the system, making the prototype system. The system uses ARM7-LPC2148 as the main control chip, through improved OOK code modulation signal and the three road three LED drive voltage are coupled respectively loaded into RGB-LED send information. At the receiving end of the system, using the four photodetector receives the optical signal, and then through the selection module of four signals in a signal amplification, filtering, shaping processing, and then through the main control chip LPC2148 demodulation receiver decoding, the data is sent to the OLCD12864 display on the LCD screen. The system prototype is completed, the system was tested. The communication speed of the system is 8.4KHz, the best communication state of this system for transmission distance It is 1.5cm, and the light intensity is 33701 u X.

【學位授予單位】：吉林大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：TN929.1

【相似文獻】

相關期刊論文 前10條

1 謝鋒云;基于RGB法的葡萄干顏色分選[J];華東交通大學學報;2004年04期

2 ;rgb程序發光二極管燈[J];電腦與電信;2008年03期

3 寧鐸;“三維攝像”中的視頻處理系統及分離出RGB三基色信號的新電路[J];西北輕工業學院學報;1997年02期

4 楊俊;趙忠明;;基于歸一化RGB色彩模型的陰影處理方法[J];光電工程;2007年12期

5 金友;RGB激光投影儀吸引新的觀眾[J];光機電信息;2005年08期

6 李恭;楊學友;王卓;;基于RGB三基色原理的手持式色度儀的設計[J];電子技術應用;2006年06期

7 Mohammad Tanvir Parvez;Adnan Abdul-Aziz Gutub;胡新穎;;基于可變位數的RGB圖像掩密算法[J];中國印刷與包裝研究;2009年04期

8 ;Maxim Integrated推出高集成度8位RGB激光器驅動器[J];電信技術;2013年02期

9 ;索尼開發高效RGB激光投影光源[J];微電腦世界;2010年04期

10 周啟德;;RGB解碼器、編碼器等在視頻信號數字處理技術中的應用[J];集成電路應用;2001年02期

相關碩士學位論文 前2條

1 楊凱;基于RGB的三基色LED可見光通信系統的研究[D];吉林大學;2017年

2 鄭翔;基于視頻RGB色值穩定性的交通事件檢測研究[D];長安大學;2009年

，

本文編號：1662609