發布時間：2018-03-20 15:45

  本文選題：GMR-G　切入點：自動測試　出處：《現代電信科技》2016年06期 　論文類型：期刊論文

【摘要】：針對GMR-13G終端射頻一致性測試時手動測試費時費力、尚無自動測試系統的問題,設計了一種支持多種測量模式切換的GMR-13G終端RCT自動測試系統主控軟件。軟件基于.NET Framework框架開發,結合用戶需求,設計了一種耦合度較低的軟件框架。通過長期使用驗證,此軟件可全自動跑完指定測量項;所有操作及測量過程均有日志記錄,方便問題回溯;此外所有測量項結果均自動生成報表,縮減了測試人員90%的工作量,尤其在高強度連續測試中效果顯著。
[Abstract]:Aiming at the problem that manual testing of GMR-13G terminal radio frequency conformance test is time-consuming and laborious, and there is no automatic test system, a GMR-13G terminal RCT automatic test system master control software is designed to support multiple measurement mode switching. The software is developed based on .NET Framework framework. A software frame with low coupling degree is designed according to the user's requirements. Through long-term use and verification, the software can automatically complete the specified measurement items, and all operations and measurement processes are recorded in a log, which is convenient for tracing back problems. In addition, the results of all measurements are automatically generated, reducing the workload of 90% testers, especially in high intensity continuous testing.
【作者單位】： 重慶郵電大學通信與信息工程學院;中國科學院計算技術研究所無線通信技術研究中心;
【分類號】：TN927.23;TP311.52

【相似文獻】

相關期刊論文 前10條

1 楊廷善;美國軍用自動測試系統管理體系概述[J];測控技術;2003年11期

2 張敏,張R，

本文編號：1639742