本文選題：三維　切入點：瞬態　出處：《強激光與粒子束》2017年06期

【摘要】：主要介紹了自主化中子時空動力學程序CORCA-K的相關研發進展。CORCA-K程序是中核集團自主研發的NESTOR軟件包中的三維瞬態中子學計算軟件。其核心功能是采用數值計算方法,求解三維瞬態中子擴散方程。其空間離散采用第二類邊界條件節塊格林函數方法,與三維穩態擴散計算程序CORCA-3D保持自洽性;時間離散采用對角線隱式龍格庫塔格式,可在向后歐拉格式的基礎上疊加實現,且具備時步自適應功能。以三維LMW基準問題、三維LRA基準問題和秦山核電廠3號機組第5循環為計算對象,開展了瞬態計算驗證。結果表明,CORCA-K計算結果與參考程序符合較好,且在保證計算精度的條件下,具有更高的計算效率。
[Abstract]:This paper introduces the research and development of the autonomic neutron space-time dynamics program CORCA-K. CorCA-K program is a three-dimensional transient neutronics calculation software in the NESTOR software package developed by China Nuclear Group.Its core function is to solve the three dimensional transient neutron diffusion equation by numerical method.The spatial discretization is based on the second boundary condition nodal Green's function method, which is self-consistent with the three-dimensional steady-state diffusion program CORCA-3D, and the diagonal implicit Runge-Kutta scheme is used in the time discretization, which can be superimposed on the backward Euler scheme.And has the time-step adaptive function.The three dimensional LMW datum problem, three dimensional LRA reference problem and the fifth cycle of unit 3 of Qinshan Nuclear Power Plant are taken as the objects of calculation, and the transient calculation verification is carried out.The results show that the calculation results of CorCA-K are in good agreement with the reference program, and the calculation efficiency is higher under the condition of ensuring the calculation accuracy.
【作者單位】： 核反應堆系統設計技術重點實驗室;
【基金】：數字化反應堆項目
【分類號】：TL329.2

【相似文獻】

相關期刊論文 前6條

1 陸學善,羅綬珉;標定正交晶系粉末照相指數的計算方法及計算程序[J];物理學報;1981年11期

2 周鵬,潘正瑛,霍裕昆;MARLOWE—固體中兩體碰撞的模擬計算程序及其應用[J];計算物理;1988年03期

3 李素梅，，金文綿;臨界計算程序KENO的開發與應用[J];原子能科學技術;1995年01期

4 李碩;張斌;劉志彥;閆宇航;余慧;陳義學;張廣春;;COSINE軟件包組件參數計算程序LATC中S_N輸運模塊的開發與初步驗證[J];原子能科學技術;2013年S1期

5 何延才,黃月鴻,胡敏;薄膜微區厚度測定計算程序—Monte Carlo模擬[J];計算物理;1987年03期

6 ;[J];;年期

本文編號：1711137