電子創新智慧實驗室系統的設計及實現
本文選題:室內物聯網 切入點:智能化 出處:《安徽大學》2014年碩士論文 論文類型:學位論文
【摘要】:隨著物聯網技術的持續發展和不斷成熟,其在室內智能化應用日益完善,最具代表性的就是智能家居在日常生活中的廣泛使用。仿照智能家居的概念和設計,本論文提出了電子創新智慧實驗室的概念和具體設計方法,將室內物聯網技術的應用擴大到現代化實驗室的建設和管理中來,這對日后實驗室發展和管理的科學化、現代化以及信息化具有重要借鑒意義。 本論文首先對目前國內外室內物聯網應用的現狀進行了調查,分析了室內物聯網技術在實驗室建設和管理應用中的實用性和可行性。其次提出了電子創新智慧實驗室系統的整體框架與各個組成模塊,針對不同模塊設計的需要,選取并介紹了各模塊所使用的核心芯片或器材。然后對整個系統設計中的通信協議及命令進行了詳細說明,并依次介紹了各個模塊的硬件電路及其功能。最后,總結了論文設計完成的主要工作,提出了論文設計中的不足之處和需要進一步完善的地方。 本論文設計拓展了室內物聯網技術的應用范圍,提升了實驗室管理的智能化水平,對“智能家居”和“智慧城市”的發展建設有重要的借鑒意義和參考價值。
[Abstract]:With the continuous development and maturity of Internet of things technology, its intelligent application in indoor is increasingly perfect, the most representative of which is the extensive use of smart home in daily life. This paper puts forward the concept and the concrete design method of the intelligent laboratory of electronic innovation, which expands the application of the indoor Internet of things technology to the construction and management of the modern laboratory, which is scientific to the development and management of the laboratory in the future. Modernization and informationization have important reference significance. First of all, the present situation of indoor Internet of things application at home and abroad has been investigated in this paper. This paper analyzes the practicability and feasibility of indoor Internet of things technology in laboratory construction and management. Secondly, it puts forward the whole framework and each component module of electronic innovation wisdom laboratory system, aiming at the needs of different modules design. The core chip or equipment used in each module is selected and introduced. Then the communication protocols and commands in the whole system design are described in detail, and the hardware circuits and their functions of each module are introduced in turn. Finally, This paper summarizes the main work of the thesis design, and puts forward the shortcomings and further improvement of the paper design. The design of this paper expands the application scope of indoor Internet of things technology, improves the intelligent level of laboratory management, and has important reference significance and reference value for the development and construction of "smart home" and "intelligent city".
【學位授予單位】:安徽大學
【學位級別】:碩士
【學位授予年份】:2014
【分類號】:TN929.5;TP391.44
【參考文獻】
相關期刊論文 前10條
1 宋慧;陳俊樺;陳曉;;淺談物聯網技術在智能建筑中的應用[J];智能建筑與城市信息;2012年02期
2 徐民;張博;;基于CP2102/CP2103的RS232接口轉換為USB接口的應用設計[J];國外電子元器件;2008年05期
3 趙璧;;簡析“智慧城市”[J];電信快報;2012年11期
4 彭明霞;;基于TVP5158的多路DVS設計[J];工業控制計算機;2012年03期
5 滑潔;孫靜;王晗;;凌陽單片機在全國大學生電子設計大賽中的應用[J];科技信息;2009年13期
6 許子悅;;物聯網智能家居淺析[J];信息通信;2013年03期
7 ;TVP5158:四路NTSC(PAL)視頻譯碼解決方案[J];世界電子元器件;2012年11期
8 武岳山;;“智慧地球”概念的內涵淺析——IBM的“智慧地球”概念說了些什么?[J];物聯網技術;2011年04期
9 羅鈞;張宇;;大容量NAND FLASH在ARM嵌入式系統中的設計與實現[J];現代電子技術;2007年11期
10 賀志強;;支持探究性學習的物聯網傳感系統的設計與開發[J];現代遠程教育研究;2012年05期
相關碩士學位論文 前1條
1 劉鵬飛;基于STM32的智能家居系統[D];煙臺大學;2013年
,本文編號:1651907
本文鏈接:http://www.sikaile.net/kejilunwen/wltx/1651907.html