發布時間：2018-03-11 21:05

  本文選題：CC　切入點：重癥監護病房環境　出處：《計算機測量與控制》2014年08期 　論文類型：期刊論文

【摘要】：為了實時監測ICU(intensive care unit)病房環境中濕度、溫度及CO2濃度等環境信息,設計了基于CC2530的重癥監護病房環境實時監測系統,系統由重癥監護病房環境感知節點、網關節點、監控終端等幾個部分構成;以CC2530為主處理器完成對感知節點的軟、硬件設計,根據重癥監護病房濕度、溫度及CO2濃度等環境信號的特點,設計各傳感器模塊的驅動電路;在Z-STACK協議棧的基礎上,設計感知節點軟件,實現數據的轉發;經測試,網關節點的收包率在80%以上,預警信號產生時間小于3s,監控終端數據刷新能力強,該系統具有精確度高、實時性強、預警及時等特點。
[Abstract]:In order to real-time monitor the environmental information of ICU(intensive care unit, such as humidity, temperature and CO2 concentration, a real-time monitoring system for intensive care unit environment based on CC2530 is designed. The system is composed of environment sensing node and gateway node in intensive care unit. The hardware and software of the sensing node are designed with CC2530 as the main processor. According to the characteristics of the environmental signals such as humidity, temperature and CO2 concentration in the intensive care unit, the driving circuit of each sensor module is designed. On the basis of Z-STACK protocol stack, the software of perceptual node is designed to transmit the data, and the test results show that the packet rate of gateway node is above 80%, the time of producing warning signal is less than 3s, the monitoring terminal has strong data refresh ability, and the system has high accuracy. Real-time, early warning and other characteristics.
【作者單位】： 徐州醫學院醫學影像學院;徐州醫學院醫學信息學院;
【基金】：徐州市科技計劃項目(XM13B021);徐州市科技計劃項目(XM12B077)
【分類號】：TP212.9;TN929.5
，

本文編號：1599891