【摘要】：在低滲透油藏開發中廣泛使用菱形反九點井網,但針對不同位置生產井及注水井的裂縫縫長配比關系還缺少廣泛深入的研究�；陂L慶油田某低滲透油藏參數,建立了數值模擬模型,在菱形反九點井網中分別設置不同的邊井、角井和注水井裂縫穿透比,研究不同裂縫配置模式對水驅開發效果的影響。流線模擬及數值模擬計算結果表明,在注水開發中,注水井縫長是影響油田產液量及水驅效果的關鍵因素;邊井裂縫較角井裂縫更易見水,對油田綜合含水影響較大,在菱形反九點井網中需要進行不等縫長優化設計;邊井裂縫縫長對水驅效果的影響分為早、中、晚期(Ⅰ、Ⅱ、Ⅲ)曲線段,隨著注水井裂縫穿透比增加,早期(Ⅰ)曲線段增長,中期(Ⅱ)曲線段縮短,而晚期(Ⅲ)曲線段變化較小;隨著角井裂縫穿透比增加,采出程度逐漸增大,當角井裂縫穿透比較大時,存在"反轉"現象;隨著注水井裂縫穿透比增加,角井裂縫優化穿透比減小,而邊井裂縫優化穿透比增加。該研究成果對于指導低滲透油藏菱形反九點井網裂縫優化設計,提高波及系數和開發效果具有重要的指導意義。
[Abstract]:Rhomboid reverse nine-point well pattern is widely used in the development of low permeability reservoirs, but there is still a lack of extensive and in-depth research on the relationship between fracture length and fracture length of production wells and injection wells in different positions. Based on the parameters of a low permeability reservoir in Changqing Oilfield, a numerical simulation model is established. Different fracture penetration ratios of edge wells, angle wells and water injection wells are set up in the rhombic reverse nine point well pattern, and the effects of different fracture configuration modes on the development effect of water drive are studied. The results of streamline simulation and numerical simulation show that the fracture length of injection well is the key factor affecting the liquid production and water drive effect of oil field in water injection development, and the fracture of side well is more likely to see water than that of angle well, which has great influence on the comprehensive water cut of oil field, so it is necessary to optimize the unequal fracture length in rhomboid reverse nine point well pattern. The influence of fracture length on water drive effect is divided into early, middle and late (鈪，

本文編號：2523735