本文選題：鉆井往復泵 + 潤滑系統��； 參考：《安徽理工大學》2015年碩士論文

【摘要】：鉆井往復泵是鉆探機械設備的重要組成部分,被譽為鉆機的心臟,良好的潤滑是鉆井往復泵正常工作的前提。本文對三缸單作用鉆井泵的潤滑系統進行了設計與分析。 本文介紹了鉆井往復泵各運動摩擦副有關摩擦、磨損和潤滑的基本理論,根據鉆井往復泵結構特點和功率流向圖,將鉆井往復泵的潤滑系統總體設計為由傳動端的壓力油循環潤滑系統和液力端的噴淋水循環潤滑冷卻系統兩個子系統組成。 設計了壓力油循環潤滑系統。推導了十字頭滑道摩擦力做功計算公式,提出了一種十字頭滑道摩擦副潤滑油量的近似計算方法,并用積分法精確計算驗證其可行性和可靠性。對壓力油循環潤滑系統中潤滑油量、齒輪油泵、油箱、管路及其他部件進行了設計計算或選型。 設計了噴淋水循環潤滑冷卻系統。將壓力油循環潤滑系統中機體油箱的冷卻水管串聯接入噴淋水循環潤滑冷卻系統,實現了結構的優化,建立了兩個系統的聯系。 運用一維流體仿真軟件Flowmaster對壓力油循環潤滑系統進行了穩態仿真,得到了潤滑系統的各元件流量、流速和壓力參數分布圖,為驗證潤滑系統設計的合理性提供一定的參考價值。
[Abstract]:Drilling reciprocating pump is an important part of drilling machinery and is called the heart of drilling rig. Good lubrication is the premise of drilling reciprocating pump working normally.The lubrication system of three-cylinder single-acting drilling pump is designed and analyzed in this paper.This paper introduces the basic theory about friction, wear and lubrication of every movement friction pair of drilling reciprocating pump. According to the structure characteristic and power flow chart of drilling reciprocating pump,The overall design of lubrication system of drilling reciprocating pump is composed of two subsystems: the pressure oil circulation lubrication system at the transmission end and the spray water circulation lubrication and cooling system at the hydraulic end.The pressure oil circulating lubrication system is designed.The formula for calculating the friction force of the crosshead slide track is derived, and an approximate method for calculating the amount of lubricating oil in the friction pair of the cross head slide track is proposed. The feasibility and reliability of the formula are verified by the precise calculation of the integral method.The lubricating oil quantity, gear oil pump, oil tank, pipeline and other parts in the pressure oil circulating lubrication system are designed and calculated.The spray water cycle lubricating cooling system is designed.The cooling water pipe of the oil tank in the pressure oil circulating lubrication system is connected in series with the spray water circulation lubricating cooling system, which realizes the optimization of the structure and establishes the connection between the two systems.The steady state simulation of pressure oil circulation lubrication system is carried out by using one-dimensional fluid simulation software Flowmaster. The distribution diagrams of flow rate, flow velocity and pressure parameters of each component of the lubrication system are obtained, which provides a certain reference value for verifying the rationality of the lubrication system design.
【學位授予單位】：安徽理工大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：TE92

【參考文獻】

相關期刊論文 前10條

1 徐志棟;楊伯原;魏平;李建華;;滾動軸承點接觸彈流油膜厚度及摩擦力矩的分析計算[J];軸承;2008年04期

2 周金超;;機械設備中滾動軸承的潤滑分析[J];甘肅冶金;2013年02期

3 吉繼賢;滾動軸承的彈性流體動壓潤滑設計[J];河南機電高等�？茖W(xué)校學報;2004年01期

4 楊琴;;國內外鉆井泥漿泵發展概況[J];機械工程師;2008年10期

5 陳海松;張錫中;孫永盛;李生義;;基于FLOWMASTER的工程機械熱平衡仿真分析[J];礦山機械;2007年06期

6 卞榮;王優強;;單粗糙峰對直齒圓柱齒輪熱彈流潤滑的影響[J];潤滑與密封;2009年05期

7 劉濟寧;曹麗平;杜志妍;;石油鉆井用泥漿泵的新發展[J];石油礦場機械;2006年04期

8 惠紀莊;紀真;鄒亞科;;基于AMESim的鉆井泵液壓系統動態特性仿真[J];石油機械;2009年08期

9 張?jiān)吕?單軍;;往復式活塞隔膜泵潤滑系統的設計計算方法[J];有色設備;2011年02期

10 許翔;畢小平;;坦克傳動裝置潤滑系統傳動油的流動仿真研究[J];裝甲兵工程學院學報;2006年03期

，

本文編號：1756111