本文選題：油庫　切入點：ARM　出處：《長安大學》2015年碩士論文　論文類型：學位論文

【摘要】：油庫每日承載著大量的油品載入和輸出,是一個國家能源流通的重要中間環節,關系著國家和人民的生命財產安全。傳統發油模式自動化程度低,操作不規范,作業效率低,少有做到四配比發油。融入自動控制技術的發油模式雖提高了自動化程度,但系統對服務器依賴較高,系統中一個部分出現問題,整個系統將無法工作�；谝陨蠁栴},研究并實現了油庫分布式油料定量裝車系統,提高了油庫發油自動化水平,確保了油庫安全高效作業,保障了油庫監控管理有序進行。油庫分布式油料定量裝車系統采用分布式結構,做到分散控制統一管理;運用信息儲存及處理、智能調速和電路設計等技術,設計了以ARM處理器為控制核心的集監控、四配比發油、查詢、自檢等為一體的付油儀;融合微機原理與控制理論及數據庫操作技術,基于Windows form設計軟件,設計了集監控、查詢、管理、自檢等為一體的管理機。實現了兼有脫機模式、直控模式和聯機模式三種控制模式的油庫分布式油料定量裝車系統。油庫分布式油料定量裝車系統由于兼有三個控制模式系統,并且一臺管理機可同時控制管理多達32臺付油儀同時工作,可滿足不同規模油庫不同的發油控制管理需求,具有普遍適用性。通過在實際工況下以付油儀計數的87套系統的實際應用情況看,沒有出現測量不準確,復位等系統問題。油庫油料定量裝車系統在實際應用中運行穩定性、準確性好,有效的提高了油庫發油作業的控制管理效率。
[Abstract]:The oil depot carries a large amount of oil loading and output every day. It is an important intermediate link in the energy circulation of a country, which is related to the life and property safety of the country and the people. The traditional oil distribution mode is of low automation, non-standard operation and low operational efficiency. Although the mode of oil production with automatic control technology improves the degree of automation, but the system is highly dependent on the server, the whole system will not work because of a problem in one part of the system. The distributed oil loading system of oil depot is studied and realized. The automatic level of oil distribution in oil depot is improved, and the safe and efficient operation of oil depot is ensured. The distributed quantitative loading system of oil depot adopts distributed structure, achieves decentralized control and unified management, uses technologies such as information storage and processing, intelligent speed regulation and circuit design, etc. This paper designs an oil feeder with ARM processor as the core of control, four matching oil sending, inquiry, self-checking and so on, integrates the principle of microcomputer, control theory and database operation technology, and designs the set monitoring and query based on Windows form design software. Management, self-inspection and so on as an integral part of the management machine. Distributed quantitative loading system for oil depot with three control modes of direct control mode and on-line mode. And a single management machine can control and manage up to 32 oil payers simultaneously, which can meet the requirements of different oil distribution control management in different scale oil storage. Through the practical application of 87 sets of systems counted by oil feeder under actual working conditions, there are no system problems such as inaccurate measurement and reset, etc. The oil loading system of oil depot is stable in practical application. Good accuracy, effectively improve the control and management efficiency of oil depot operation.
【學位授予單位】：長安大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：TE97

【參考文獻】

相關期刊論文 前7條

1 劉永強，，龔成龍;多單片機控制的油庫自動發油系統[J];電子技術;1996年04期

2 劉建軍;;微機在油庫自控發油及管理系統中的應用[J];工業儀表與自動化裝置;1992年06期

3 羅時金;;基于PLC的碼頭定量發油系統設計[J];測控技術;2011年03期

4 車一曼;;基于RTU的集散式油庫發油系統[J];制造業自動化;2008年08期

5 劉玉璋,歐清禮;油品儲運系統防靜電的安全技術研討[J];石油化工安全技術;2000年03期

6 張潮生;21世紀初煉油化工自動化[J];石油化工動態;1998年05期

7 崔穎;;PLC可編程控制器應用于乙醇汽油調和系統[J];油氣田地面工程;2008年09期

本文編號：1636812