【摘要】：21世紀以來，越來越多的新型技術的發展催生了大批新型電梯部件的蓬勃發展，這些部件不僅是從安全性和可靠性上有了極大的提升，同時，在成本方面較之以往的產品有了很大的降低。但是，這些新型部件由于以往的產品設計中使用較少，存在系統集成過程中經驗不足的問題，使部件的性能及其優越性沒有有效發揮。 本文將結合公司開發的一款新型節能產品，結合公司前沿電梯部件技術，集中闡述在電梯系統集成過程中所進行的理論計算及其合理的部件選擇來滿足產品的設計要求，同時，舉例進行產品集成計算，并且將計算結果通過試驗進行驗證，對于所開發產品的能量消耗等級，，同時在試驗過程中進行測定。測定的結果表明，所應用的系統集成方法滿足電梯對基礎系統的要求，并且在能源節約有著顯著的效果。
[Abstract]:Since the 21st century, the development of more and more new technology has led to the vigorous development of a large number of new elevator parts, which not only have a great improvement in safety and reliability, but also have a great reduction in cost compared with the previous products. However, these new parts have less experience in the process of system integration due to the less use in the conventional product design, so that the performance and the superiority of the parts are not effectively played. In this paper, a new kind of new product, which is developed by the company, is combined with the technology of the front elevator component of the company, and the theoretical calculation and the reasonable part selection in the course of the system integration of the elevator are set forth to meet the design requirements of the product. Meanwhile, the product integration meter is given by way of example. The calculation is calculated and the calculation result is verified by the test, and the energy consumption level of the product is developed, and the test is carried out during the test. The results of the measurement show that the applied system integration method meets the requirements of the elevator to the basic system, and has a significant effect on energy conservation
【學位授予單位】：天津大學
【學位級別】：碩士
【學位授予年份】：2013
【分類號】：TU857

【參考文獻】

相關期刊論文 前9條

1 胡學芝;基于DSP的電壓型空間矢量PWM整流器研究[J];電氣應用;2005年11期

2 王士湖;王莉;;一種再生制動控制電路的設計[J];電源技術應用;2002年06期

3 潘永湘,董娟,李守智,張大衛;三相電壓型PWM高頻整流器新型控制算法[J];電力電子技術;2000年06期

4 吳隆安，賴壽宏，涂從歡;能量回饋系統的設計與實現[J];電力電子技術;1995年01期

5 趙乃霞,徐展;空間向量脈寬調制原理及實現[J];電氣傳動;2001年01期

6 黃詩江,姜暉;一種安全可靠的反接制動控制電路[J];電氣電子教學學報;2000年03期

7 劉力軍;變頻器應用于微機控制電梯[J];電氣時代;2002年11期

8 董曉鵬,王兆安;具有快速動態響應的單位功率因數 PWM 整流器[J];西安交通大學學報;1997年11期

9 吳曉慧;旋轉電機轉子轉動慣量測定方法[J];中小型電機;2005年02期

本文編號：2506057