發布時間：2018-12-17 07:28

【摘要】：項目質量控制是項目管理的重要內容,工程項目各項工作的質量如何,是建設項目成敗的關鍵。工程項目質量控制是個系統工程,可行性研究、勘察設計、施工、竣工驗收等環節都涉及質量控制問題。施工階段質量控制是工程項目全過程質量控制的關鍵環節。施工階段質量管理的有效性,關系到整個工程項目的最終質量能否達到國家規范和合同的要求,關系到整個工程項目的順利完成和成本控制,工程質量很大程度上決定于施工階段質量控制。因此,探索研究工程項目施工階段的質量控制措施,切實做好項目質量控制具有重要的意義。 隨著我國石油、天然氣的消費量的迅猛增加,我國的石油天然氣管道建設迅速發展,未來數年我國管道工業將會高速的發展。在管道工業大發展的背景下,提升管道建設質量,確保管道平穩、高效運行,是發展的必然要求。決定管道使用壽命的三大要素分別是：管道的防腐質量、管道的焊縫質量、管道在沖刷地段處施工質量,其中最關鍵的是管道焊接質量問題。管道焊接施工是管道建設中最主要的環節之一,是影響管道工程能否滿足設計要求、能否安全服役的關鍵。因此,做好管道焊接施工的質量控制工作尤為重要。本篇文章的著眼點在于從現代項目管理的角度主要分析項目管理中的質量控制問題,闡述項目質量控制理論,介紹我國項目質量控制的實踐與經驗。通過對長慶油田長榆輸氣管線焊接項目進行分析,運用全過程管理理論和工程項目質量控制五因素理論進行具體項目的質量控制,提出管線焊接項目質量控制的合理性建議,探索、研究質量控制五因素理論的具體實踐方法。建立焊接施工質量管理體系,實行全面的質量控制的舉措,有效提升管道焊接工程項目質量。
[Abstract]:Project quality control is an important part of project management. Project quality control is a systematic engineering, feasibility study, investigation and design, construction, completion acceptance and other links are involved in quality control. Quality control in construction stage is the key link in the whole process of project quality control. The effectiveness of quality management in construction stage is related to whether the final quality of the whole project can meet the requirements of national specifications and contracts, and to the successful completion and cost control of the whole project. The quality of the project depends largely on the quality control in the construction stage. Therefore, it is of great significance to explore and study the quality control measures in the construction stage of engineering projects and to do a good job of project quality control. With the rapid increase of oil and natural gas consumption in China, the construction of oil and gas pipelines in China is developing rapidly, and the pipeline industry will develop rapidly in the next few years. Under the background of the great development of pipeline industry, it is necessary to improve the quality of pipeline construction and ensure the smooth and efficient operation of pipeline. The three factors that determine the service life of pipeline are: the quality of pipeline anticorrosion, the quality of weld seam of pipeline, the quality of construction of pipeline in scour section, among which the key problem is the quality of pipeline welding. Pipeline welding construction is one of the most important links in pipeline construction. Therefore, it is very important to control the quality of pipeline welding construction. This paper focuses on the analysis of quality control in project management from the perspective of modern project management, expounds the theory of project quality control, and introduces the practice and experience of project quality control in China. By analyzing the welding project of Changyu gas pipeline in Changqing Oilfield, applying the theory of whole process management and the five-factor theory of quality control of engineering project to carry out the quality control of the specific project, the reasonable suggestions for quality control of pipeline welding project are put forward. To explore and study the practical methods of the five factors theory of quality control. Establish welding construction quality management system, implement comprehensive quality control measures, effectively improve pipeline welding project quality.
【學位授予單位】：西安石油大學
【學位級別】：碩士
【學位授予年份】：2013
【分類號】：TU712.3;TE973

【參考文獻】

相關期刊論文 前10條

1 田金柱;;壓力管道施工焊接質量控制[J];管道技術與設備;2008年03期

2 類紅玲;;做好工程質量控制的幾點體會[J];改革與開放;2010年02期

3 李峰;;如何抓好項目質量管理[J];經營管理者;2010年18期

4 楊旭;段先猛;;西氣東輸二線9A標段焊接質量控制[J];電焊機;2009年05期

5 曾曉楠;;淺談工程質量管理[J];福建質量管理;2002年05期

6 何文杰;王杰;;天然氣管道焊接施工質量控制措施[J];河南建材;2010年06期

7 李謙益,逯燕玲,朱建國;油氣輸送管道的焊接施工質量控制[J];焊接技術;2004年03期

8 張峰,衣粟,祝衛國;長輸壓力管道焊接及其質量控制[J];焊接技術;2005年02期

9 陳熙;駱仁俊;;基于精益建造的工程項目質量控制[J];工程管理學報;2010年02期

10 管玉興;;工程項目質量控制研究[J];工程管理學報;2010年05期

，

本文編號：2383884