底部框架—抗震墻結構基于位移的抗震性能評估研究
本文關鍵詞:底部框架—抗震墻結構基于位移的抗震性能評估研究 出處:《長沙理工大學》2013年碩士論文 論文類型:學位論文
更多相關文章: 底部框架-抗震墻結構 基于位移 抗震性能評估 Push-over分析
【摘要】:底部框架-抗震墻房屋是我國中小城鎮廣泛采用的結構形式之一,尤其常見于我國中西部多震地區。2008年汶川大地震中,震區底框結構房屋遭受嚴重震害,給人民群眾生命財產帶來巨大損失。在基于性能的抗震設計理論成為地震工程界主流思想的大背景下,砌體結構房屋基于該設計理論上應用相對較少,所以本文圍繞底框結構這一典型砌體結構形式,針對其抗震性能評估,結合基于性能的抗震設計理論思想,進行了以下幾個方面的研究: (1)引入Push-over分析方法,并對Push-over分析方法在底框結構性能評估過程中水平荷載模式的選取做了討論。通過參數轉換,將我國抗震設計規范與美國ATC-40中反應譜進行等效轉化,為本文的研究提供了理論支撐。 (2)根據配筋混凝土砌塊剪力墻與混凝土剪力墻的力學性能上的相似性,,借鑒已有學者對混凝土剪力墻的模擬方法,提出采用分層殼單元實現對配筋混凝土砌塊剪力墻模擬,并通過建立試驗墻片模型驗證了其準確性與合理性。 (3)參照國內外規范及眾多學者提出的性能水準劃分,建立了以混凝土砌塊為主要墻體材料的底框結構抗震性能基于位移的五水準劃分,并分別給出了“充分運行”、“運行”、“基本運行”、“生命安全”、“倒塌”性能水準位移角限值量化指標。 (4)基于SAP2000分析軟件建立底框結構房屋的三維簡化彈塑性分析模型,通過將Push-over分析方法與ATC-40推薦的能力譜法相結合,確定了結構在各地震水準下的性能點,并根據各性能點處結構各樓層的層間位移角參照本文提出性能水準劃分標準進行結構抗震性能評估。
[Abstract]:The bottom frame-seismic wall building is one of the structural forms widely used in small and medium-sized towns in China, especially in the multi-earthquake areas in the central and western regions of China. 2008 Wenchuan earthquake. Under the background of seismic engineering, seismic design theory based on performance has become the mainstream thought of earthquake engineering, because of the severe earthquake damage to the buildings with frame structure at the bottom of the earthquake area, which brings huge losses to the lives and property of the people. The application of masonry structure building based on this design theory is relatively few, so this paper revolves around the bottom frame structure, a typical masonry structure form, according to its seismic performance evaluation, combined with the performance-based seismic design theory idea. The following studies were carried out: 1) the Push-over analysis method is introduced, and the selection of horizontal load mode in the performance evaluation of bottom frame structure by Push-over analysis method is discussed. The equivalent transformation between the seismic design code of China and the response spectrum of ATC-40 in the United States provides theoretical support for the study of this paper. 2) according to the similarity of mechanical properties between reinforced concrete block shear wall and concrete shear wall, the simulation method of concrete shear wall has been used for reference. A layered shell element is proposed to simulate the shear wall of reinforced concrete block. The accuracy and rationality of the model are verified by establishing the test wall model. 3) referring to the domestic and foreign codes and the classification of performance level put forward by many scholars, a five-level partition of seismic behavior of bottom frame structure based on displacement is established, which takes concrete block as the main wall material. The quantitative indexes of "full operation", "operation", "basic operation", "life safety" and "collapse" are given respectively. 4) based on the SAP2000 analysis software, the three-dimensional simplified elastic-plastic analysis model of the bottom frame structure building is established. By combining the Push-over analysis method with the capability spectrum method recommended by ATC-40, the performance points of the structure under various earthquake levels are determined. According to the displacement angle of each floor of the structure at each performance point, the seismic performance of the structure is evaluated according to the criterion of performance leveling.
【學位授予單位】:長沙理工大學
【學位級別】:碩士
【學位授予年份】:2013
【分類號】:TU352.11
【參考文獻】
相關期刊論文 前10條
1 尹華偉,汪夢甫,周錫元;結構靜力彈塑性分析方法的研究和改進[J];工程力學;2003年04期
2 葉列平;陸新征;馬千里;汪訓流;繆志偉;;混凝土結構抗震非線性分析模型、方法及算例[J];工程力學;2006年S2期
3 鄭山鎖,楊勇;底部框架-抗震墻磚房的抗震設計[J];工業建筑;2002年07期
4 范砥,王煥定;底框結構抗震分析規范規定中的若干討論[J];哈爾濱工業大學學報;2004年09期
5 葉獻國,種迅,李康寧,周錫元;Pushover方法與循環往復加載分析的研究[J];合肥工業大學學報(自然科學版);2001年06期
6 李琪;顧榮蓉;楊鼎宜;王德信;;底部框架-抗震墻砌體結構靜力彈塑性分析[J];河海大學學報(自然科學版);2007年01期
7 蔡勇,施楚賢,易思甜;配筋混凝土砌塊砌體剪力墻位移延性設計方法[J];湖南大學學報(自然科學版);2005年03期
8 劉雁,鄒筱靜,鐘文樂,陳蓓,盧文勝,李俊蘭,呂西林,潘立本;底部兩層框架磚房1/5比例模型抗震試驗研究[J];建筑結構學報;2001年01期
9 歐進萍,侯鋼領,吳斌;概率Pushover分析方法及其在結構體系抗震可靠度評估中的應用[J];建筑結構學報;2001年06期
10 王鳳來;費洪濤;;配筋砌塊短肢砌體剪力墻抗震性能試驗研究[J];建筑結構學報;2009年03期
相關會議論文 前1條
1 苑振芳;劉斌;;混凝土砌塊建筑發展現狀及展望[A];現代砌體結構——2000年全國砌體結構學術會議論文集[C];2000年
相關博士學位論文 前4條
1 熊立紅;多層混凝土砌塊結構性態抗震研究[D];中國地震局工程力學研究所;2005年
2 蔡勇;配筋混凝土砌塊砌體框支剪力墻房屋抗震性能研究[D];湖南大學;2005年
3 常兆中;混凝土砌塊結構非線性地震反應分析及基于性能的抗震設計方法[D];中國建筑科學研究院;2005年
4 呂偉榮;砌體基本力學性能及高層配筋砌塊砌體剪力墻抗震性能研究[D];湖南大學;2007年
相關碩士學位論文 前4條
1 宋林波;底部兩層框架—抗震墻砌體房屋抗震性能分析與校驗[D];重慶大學;2011年
2 宋力;混凝土砌塊砌體基本力學性能試驗研究與非線性有限元分析[D];湖南大學;2005年
3 陳俊;底部框架—抗震墻房屋的抗震性能及層剛度比的影響規律分析[D];重慶大學;2010年
4 沈繼美;砌體勻質化過程的數值模擬方法與應用研究[D];長沙理工大學;2012年
本文編號:1392613
本文鏈接:http://www.sikaile.net/kejilunwen/sgjslw/1392613.html