本文選題：計量器具檢定 + 到期未檢��； 參考：《大連理工大學》2016年碩士論文

【摘要】：現階段各種關于質量技術監督管理的軟件系統、網站大多數都是各自為政,這樣就導致質檢系統內部上級單位對下級單位的檢定工作不能夠及時、準確的掌握;并且各個企業單位為了減少開支,對于到期應該送檢的設備沒有及時送檢或者不送檢,以至于質檢機構大量投資的檢測設備資金回收周期較長。另外,對于檢定單位來說,如何合理化安排檢定流程當中服務臺的使用率也是勢在必行。針對以上所提出的問題,本文以某省質量技術監督局計量器具檢定管理流程為研究對象,并且在計量器具檢定流程管理中采用排隊論,提高窗口服務臺的使用效率。日常計量檢定管理系統實現了從窗口登記、設備接收、設備檢測、設備審核、領導審批、證書打印等一系列的日常檢定流程,對到期未檢的設備進行報警,并責令稽查部門予以處罰。三級計量系統管理平臺主要是對上報的檢定數據進行集中化、分級化的統一管理。日常計量檢定管理系統對于有效的檢定數據,按照統一的格式上傳給三級計量系統管理平臺。三級計量系統管理平臺,根據上級單位只能對本單位及所屬下級單位的檢定數據進行查詢、統計、對比的業務要求,系統對每個系統用戶劃分了不同權限、職能,逐級管理。最后,采用黑盒測試,模擬了整個系統的業務流程,經過幾次用例測試,驗證了本系統能夠充分解決現階段質量技術監督管理工作中存在的缺陷,并且能夠安全可靠的運行。
[Abstract]:At this stage, most of the software systems of quality and technical supervision and management have their own websites, which leads to the quality inspection system internal superior units' verification work of the subordinate units can not be timely and accurate grasp; And each enterprise unit in order to reduce the expenditure, for the equipment that should be submitted for inspection at the due time or not, so that a large number of quality inspection institutions invest in the detection equipment fund recovery cycle is longer. In addition, for the verification unit, how to rationalize the verification process in the use of help-desk is also imperative. In order to improve the efficiency of window service desk, this paper takes the management flow of measuring instrument verification in a provincial bureau of quality and technology supervision as the research object, and adopts the queuing theory in the management of measuring instrument verification process. The daily measurement verification management system has realized a series of routine verification processes from window registration, equipment receiving, equipment testing, equipment auditing, leading examination and approval, certificate printing and so on. And ordered the audit department to punish. The management platform of three-level metrology system is mainly centralized and unified management of the reported verification data. Daily measurement verification management system for effective verification data, according to the unified format uploaded to the three-level measurement system management platform. The three-level metrology system management platform, according to the superior unit can only inquire the verification data of the unit and the subordinate unit, statistics, contrast the business request, the system has divided the different authority, the function, the level management to each system user. Finally, the business process of the whole system is simulated by using black box test. After several use case tests, it is verified that the system can fully solve the defects existing in the quality and technical supervision and management work at the present stage, and can run safely and reliably.
【學位授予單位】：大連理工大學
【學位級別】：碩士
【學位授予年份】：2016
【分類號】：TP311.52

【相似文獻】

相關期刊論文 前2條

1 呂紅軍,潘力賓,林莉;計算機在計量器具檢定管理中的應用[J];計量技術;1998年10期

2 ;[J];;年期

相關重要報紙文章 前10條

1 通訊員 尹克強 記者 郭東;群眾送檢計量器具檢定不再收費[N];河北日報;2013年

2 記者 吳世永 通訊員 馮莉萍;全州計量器具檢定合格率達95%[N];博爾塔拉報;2008年

3 特約記者 陳應國;祥云完成煙葉收購計量器具檢定工作[N];大理日報(漢);2009年

4 王玲;安徽巢湖 加強醫療機構計量器具檢定[N];中國質量報;2009年

5 記者張建生;全市計量器具檢定覆蓋率達到98%[N];長治日報;2010年

6 小朱;糧庫計量器具檢定全部合格[N];無錫日報;2009年

7 高飛邋吳昊;出口加工區企業計量器具檢定問題亟待解決[N];中國國門時報;2008年

8 陳奉軍　吳恒昊 記者 張華;“斤斤計較”管住缺秤少量[N];中國質量報;2009年

9 河南安陽縣質監局 關東風;開展醫用計量器具檢定的幾點做法[N];中國質量報;2008年

10 通訊員 胡曉亮 克依木江;重視棉花收購計量器具檢定工作[N];喀什日報(漢);2007年

相關碩士學位論文 前2條

1 楊曉晨;計量器具檢定系統的設計與實現[D];山東大學;2015年

2 劉喜瑞;山西計量設備檢定管理系統的設計與實現[D];大連理工大學;2016年

，

本文編號：1849620