【摘要】：為抓捕斷裂或者倒轉打滑的輸送帶,從而減少輸送帶斷裂造成的破壞與損失,介紹了一種新型全斷面斷帶抓捕器,闡述了該抓捕器的結構與動作原理,并根據理論力學基本知識分析了抓捕過程,給出了抓捕器實現斷帶抓捕的條件,并分析了夾持角與摩擦因數等對抓捕效果的影響規律。研究結果表明:當夾持角θ與摩擦因數α滿足1/α≤tanθ時,抓捕器可形成自鎖,即在結構與輸送帶強度允許范圍內,抓捕器可以提供足夠大的抓捕力夾持?jǐn)鄮?當1/αtanθ時,抓捕器不能形成自鎖,此時機構存在最大抓捕力,且與配重、夾持角以及摩擦因數有關,可根據實際需求配重調整等方法實現抓捕。
[Abstract]:In order to catch the conveyor belt with fracture or reverse slip, so as to reduce the damage and loss caused by the fracture of the conveyor belt, this paper introduces a new type of full-section catcher with broken belt, and expounds the structure and action principle of the catcher. According to the basic knowledge of theoretical mechanics, the process of arrest is analyzed, and the conditions for the arrest of broken belt are given, and the influence of clamping angle and friction coefficient on the capture effect is analyzed. The results show that when the clamping angle 胃 and friction factor 偽 satisfy 1 / 偽 鈮，

本文編號：2395778